NOTE: All modifications reported below cause the registered vehicle to be non compliant and unsuitable for
circulating on public roads: consequently it may be used only in "closed circuits" by authorised subjects hold-
ing the relevant driving licence.
"KIT" ASSEMBLING INSTRUCTIONS
Kit "RACING" (TE-SMR)
Identify the cover of the throttle cable pulley of the throttle body located on the right
side of the vehicle.
Move away the pedal starting lever from the pulley cover.
Loosen the hexagonal socket screw holding the plastic cover.
Remove the screw.
O.30
Part. N. 8000 B0148 (02-2008)