Husqvarna TE 250 Workshop Manual page 177

ENGINE REASSEMBLY
Mount contemporarily the crankshaft and the counter balancing shaft aligning the
chasings on the gears (the contemporary assembling of the crankshaft and the
counter balancing shaft is obligatory on 400-450-510models). Mount the distance
washer on the crankshaft.
Smear the union surface of the left half case with "LOCTITE 510";
warm the crankshaft bearing seat and fit the half case. In order to join the crankcase,
by striking with a plastic hammer join the two halves. Tighten the allen bolts (8 Nm-
0,8 Kgm-5.8 ft/lb).
Part. N. 8000 B0148 (02-2008) H.23