Zone Or Zone / Address (B1) - Panasonic EBL512 G3 User Manual

Panasonic Eco Solutions Nordic AB
MEW01603 Rev: -
5.1
Escape
menu

Zone or Zone / Address (B1)

Up to 512 whole zones can be disabled via menu B1. Normally all
alarm points within the zone will be disabled except the addressable
manual call points.
Up to 200 alarm points (Zone / Address) can be disabled via menu B1.
Disabled Zones and/or Zone / Addresses can also be Re-enabled via
menu B1.

Cont. from , page 7.
B1 Zone or Zone / Address

Press ( ).
Disable
NOTE! To Re-enable, see ➓ below.
By default is Zone 000 selected. Press the Soft key "Change type
of disablement" to toggle between:
Zone 000
Zone 000 address 00.

Use the keypad to type the Zone or Zone / Address. Press ( ).

If "Automatically re-enablement" shall be used, press (  and  ) to
highlight Yes , accept the suggested time or use the keypad to type
another time (hh:mm). Press ( ).
A successful disablement is indicated by a beep and a
shown in the Re-enable list
A not successful disablement is indicated by another beep and a
Re-enable
➓ Press the Soft key
Disable
Re-enable list.
Press (  ) to highlight the Zone or Zone / Address that shall be Re-
enabled.
⓫ Press ( ). A successful Re-enablement is indicated by a beep and it
will also disappear from the Re-enable list
⓬ To leave a menu press ESC.
To leave the menu system press the Soft key "Escape menu".
EBL512 G3 version 2.0.x, Daily user's manual
.
⇥
to toggle between:
" "
8
It will also be
"√".
"X".
.