Transfer To Outside; Maximum Cyclic Tone Time; Maximum Call Duration - Panasonic KX-TVA50 Programming Manual

2.5.4 Parameters

Maximum Cyclic Tone Time

Specifies the length of time the VPS waits when a cyclic tone is detected before it disconnects the call.
Default
6 s
Value Range
0 s–60 s

Maximum Call Duration

Specifies the maximum duration of calls. If the VPS detects no DTMF signals for the specified amount of time,
it terminates the call. Calls will not be terminated while playing or recording messages. If this setting is set to
"0", calls will not be terminated.
Default
10 min
Value Range
0 min–60 min

2.5.4.12 Transfer to Outside

These parameters determine how the VPS will transfer calls to trunk (CO line) via the following features: Call
Transfer Service, Custom Service, Personal Custom Service, Caller ID Callback.
176 Programming Manual Document Version 3.0 2010/06