Yamaha MXT9L 2019 Manual page 21

Turn signal switch " /
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
turn, push this switch to "
released, the switch returns to the cen-
ter position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch " "
Press this switch to sound the horn.
Stop/Run/Start switch " /
To crank the engine with the starter,
set this switch to " ", and then push
the switch down towards " ". See
page 6-2 for starting instructions prior
to starting the engine.
Set this switch to " " to stop the en-
gine in case of an emergency, such as
when the vehicle overturns or when the
throttle cable is stuck.
EAU66040
" Hazard switch " "
With the key in the "ON" or "
tion, use this switch to turn on the haz-
". When ard lights (simultaneous flashing of all
turn signal lights).
The hazard lights are used in case of an
emergency or to warn other drivers
when your vehicle is stopped where it
might be a traffic hazard.
EAU66030
NOTICE
Do not use the hazard lights for an
extended length of time with the en-
EAU66060
/ " gine not running, otherwise the bat-
tery may discharge.
Cruise control switches
See page 4-6 for an explanation of the
cruise control system.
"MENU" switch
This switch is used to make setting
changes within the multi-function me-
ter unit. (See page 4-9.)
Instrument and control functions
EAU66010
"SELECT" switch
" posi- This switch is used to make setting
changes within the multi-function me-
ter unit. (See page 4-9.)
Drive mode switch "MODE"
See page 4-16 for an explanation of
the drive mode.
ECA10062
EAU84250
EAU84521
4-3
EAU84530
EAU84260
4