Handlebar Switches - Yamaha MXT9L 2019 Manual

Instrument and control functions
To unlock the steering
4
1
1. Push.
2. Turn.
From the "LOCK" position, push the
key in and turn it to "OFF".
(Parking)
The hazard lights can be turned on, but
all other electrical systems are off. The
key can be removed.
The steering must be locked before the
key can be turned to "
NOTICE
Using the hazard lights for an ex-
tended length of time may cause the
battery to discharge.

Handlebar switches

Left
1
2
6
1. "MENU" switch
2. "SELECT" switch
3. Cruise control switches
4. Horn switch "
EAU65680
5. Turn signal switch "
6. Dimmer/Pass switch "
".
ECA22330
EAU66055
2
3
5
4
"
/ "
/ /PASS"
4-2
Right
1
3
2
1. Stop/Run/Start switch " /
2. Drive mode switch "MODE"
3. Hazard switch " "
Dimmer/Pass switch "
Set this switch to " " for the high
beam and to " " for the low beam.
To flash the high beam, press the
switch down to "PASS" while the
headlights are on low beam.
TIP
When the switch is set to low beam,
only the two outer headlights come on.
When the switch is set to high beam,
the two inner headlights also come on.
/ "
EAU85481
/ /PASS"