Insignia NS-PS10MC Quick Setup Manual

Congratulations on your purchase of a high-quality Insignia product. Your
micro cut shredder is designed for reliable and trouble-free performance.
Package contents
• Micro cut shredder with wastebasket
• Quick Setup Guide
Features
OVERLOAD
POWER OVERHEAT
On/Auto Off Rev
Before using your new product, please read these instructions to prevent any damage.
10-sheet Micro Cut Shredder | NS-PS10MC/NS-PS10MC-C
Setting up your shredder
1 Place the wastebasket securely in the shredder.
Note: Do not use plastic bags to line the wastebasket.
2 Connect the power cord to a power outlet.
# ITEM DESCRIPTION
1 Disc slot For CDs and DVDs. Insert one at a time.
2 LED indicators POWER - Lights when the shredder is in use.
OVERLOAD - Lights when trying to shred over
the maximum 10 sheets, or paper is folded.
OVERHEAT - Lights when the shredder has
overheated. If this light is on, turn off the
shredder and let it cool for at least 50 minutes.
3 Paper/Credit card Insert up to 10 sheets of paper at a time or one
slot credit card at a time.
On/Auto ( | ) - Shreds an item when inserted
4 Switch
into the paper or disc slot, then stops when it is
finished shredding.
Off () - Turns off the shredder.
Rev ( ) - Reverses the paper to clear a jam or
remove unshredded paper.
5 Window Allows you to see when the wastebasket is full.
6 Wastebasket Empty when 2/3 full.
7 Wheels Allows you to easily move your shredder.
Quick Setup Guide