Page 2
Install the speaker board at the level place getting the thicker board up (the vertical direction where you can read CEC and WELLFLOAT Ⓡ characters properly). ❸ The weight of an audio device you can install on the speaker board should be between 5kg and 90kg.
Page 3
ASB3545/4560WF Manual ❺ Installing a weight unbalance device even at the center of the board the board may lean. In this case the horizontal balance of the board can be revised by increasing the spring tension of the hanging structure. Gently turn the remarked one of the three props at the leaned corner with a 6mm spanner counterclockwise to move up the prop gradually so that the spring tension is increased and the horizontal balance...