Parker Radial NiteFly Quick Manual

For More Information, visit PARKERGUITARS.COM
Radial NiteFly Model, Hum/Hum w/ Piezo
Parker Fly Control Layout
1. Magnetic P/U Volume
2. Magnetic tone & Push/Pull for Coil Tap
3. Piezo Volume
4. Magnetic P/U Selector (bridge, bridge and neck, neck)
5. Mag/Piezo Selector (Mag only, Mag & Piezo, Piezo only)
 ¼" Output, Mag/Piezo smart jack. Mono cable will sum both signals to mono-
stereo Y cable will split Mag/piezo signals.
 9v Battery required for operation
ADJUSTING PICK-UP HEIGHT
Each pickup is secured to the body by two slotted screws.
These mounting screws are located under the E strings on the outside coils. Turn the screws
clockwise to tighten and counterclockwise to loosen. To adjust pickup height, unscrew both
pickup mounting screws. Raise or lower your pickup to the desired position with your fingers.
Re-tighten both pickup mounting screws flush with top of pickup. Do not over tighten pickup
mounting screws flush with top of pickup.
Output