Contents Before fitting Before fitting ......................Unwrap the unit and check that all the parts in the list are present. Contact the supplier Contents in screw bag ..................if there are any deficiencies or parts missing. Position/fitting ..................... You need to use 6 mm and 8mm (5/16” & ¼”) approved copper pipes on the TL6 and Use and maintenance ..................
Position/fitting Use and maintenance The evaporator must be positioned so that it does not blow on the door, as this can cause Setting the temperature: condensation in the frame. It is also important that it is positioned so that there is good The thermostat has a working area of 5 - 15 degrees Celcius.
Page 4
Compressor unit TL6-10-16 Compressor unit Luve 6-10-16 Very quiet compressor unit with dust filter, vibration mufflers on the unit box, This model is well-suited for placing in e.g. a small loft, room etc. compressor and fan. Vibration muffler Timer Condenser Dust filter Start condenser Compressor...
Connection diagram for split unit Information about the equipment Connection diagram for split unit to help THERMOCOLD's customer service in case a fault occurs with the equipment and to register the equipment for warranty purposes. Equipment model: ___________________________ Serial number: ___________________________ EC declaration of conformity: This equipment is designed, constructed and sold in accordance with the safety...
Transport/Repair/Replacement Commercial purchase Commercial purchase is understood to mean anything that is not a consumer purchase. Thermocold A/S or the distributor can determine whether faults and deficiencies Where products are going to be placed in cafes, restaurants, street kitchens, hotels, need repair, either at the customer site or at a designated workshop.