Download Print this page

H.F.Prints CLB 200 wb User Manual

Radio reporter base station. incl. hidyn

Advertisement

Quick Links

CLB 200 wb
CLR 200 wb
CLR 200 dual
Radio reporter base station.
Incl. Hidyn

Advertisement

loading

Summary of Contents for H.F.Prints CLB 200 wb

  • Page 1 CLB 200 wb CLR 200 wb CLR 200 dual Radio reporter base station. Incl. Hidyn...
  • Page 2 This is a product description for VHF diversity receiver with build in UHF return transmitter type CLB 200 (CLR 200 is equal to CLB200 but without build in return transmitter) CLB 200 is a complete radio broadcast station. With a CLB 200 you can receive a portable transmitter on VHF, but also transmit on UHF at the same time.
  • Page 3: Operation

    CLR 200 WB (mono and stereo) Several switches like on-off and mono-stereo are not used to prevent unwanted settings on the front panel that makes remote control impossible. CLB 200 WB transmitter settings: Input selection, Microphone or Line in. Cannot be controlled by remote control.
  • Page 4: Remote Control

    Power of the CLB 200 WB: The CLB has a standard 230V power supply. For use in cars, planes etc. where no 230V is present CLB 200 can be provided with a 12V connector. This is a 4-pin XLR connector.
  • Page 5 Specifications CLB 200 WB reporter base station General: Power supply 230V 40VA 12 - 15V 2.5A Antenna connectors optional BNC - TNC Audio connector (s) XLR 3 male / female Dimensions 1U 19 "depth 280mm Transmitter Number of channels: adjustable at front...
  • Page 6 Programming the entire unit: Connect a laptop with RS232 adapter cable to connect the program to the interface board. (Interface Print the front print, connection behind the unit (next antenna connector) via a 3.5mm jack) Open the HyperTerminal program. (desk accessories), or use eq. Program. Settings: Port: COM1 ?? depending on the PC Bits per second 9600...
  • Page 7 Remote pin configuration of the CLB 200 W. (French version) standard description I / O remarks pin number Ground reporter talkback select out for France only TX signalizing +5V = TX on TX contact (PTT) GND is TX on open is front control RF output level (TX) 0 –...
  • Page 8 Note Mute setting via remote. 0V (GND) audio 5V maximum mute threshold, about 50 uV In between all levels adjustable. I = in O = out if possible open collector control. H.F.Prints Overcinge 40 8226 TN Lelystad 0320-250487 www.hfprints.com info@hfprints.com...

This manual is also suitable for:

Clr 200 wb