Advertisement
Quick Links
Advertisement
Summary of Contents for sanyuan 3S/NEW SU -1.5
-
Page 1: User Manual
ACS-3S/NEW SU ELECTRONIC SINGLE/DUAL DISPLAY WEIGHING/COUNTING SCALE USER MANUAL... - Page 2 Thank you for choosing our ACS-3S / NEW SU single/double side display electronic waterproof weighing/counting scale. The new SU model is made of plastic and the 3S is made from stainless steel. The scale is manufactured with advanced computer-controlled techniques. It exhibits hi accuracy weighing performance, convenient for carrying but also being cheap in price.
- Page 3 Ⅱ Ⅱ Ⅱ Ⅱ . KEYBOARD AND CHARACTER PROMPT 1. Keyboard Turns the scale on and zero. ZERO Tare key. TARE Power off. Set up / Configuration key. Set parameter and input configuration. 2. Error Messages dc x.xx Means the voltage of battery is x.xx V. (with buzzer sounding) ------ Weight is over 100% full scale + 9e –...
-
Page 4: Battery Indication
III. OPERATION GUIDE 1. Preparation Level the scale and make sure the pan is horizontal by adjusting the base feet, and using the built-in spirit level for accuracy. 2. Turn on Press the [ON/ZERO] key. The buzzer will sound and the display will show the battery voltage level, followed by the machine version number, and then a countdown from 9 to 0. - Page 5 Charge The power is supplied by an internal rechargeable lead acid battery (6V/4Ah). When the display shows “-bAtLo-”, please connect the machine to a mains supply and charge immediately. The time of full charging is 12 hours. 9. Set parameters Press [SET/0~9] key for 3 seconds.
- Page 6 9.2 Changing weighing units 9.2.1 When “units” is displayed, press [TARE], then press [SET/0~9] to choose, then press [TARE] to confirm and exit. Unit: H9(kg), 9(g),Lb,oz,pcs(counting). (Imperial units may not be chosen when calibrating). 9.2.2 Pcs Counting: Press [SET] key for 3 seconds. The display will show ‘Range’.
- Page 7 9.7 Change division size When menu displays d， press [TARE] to enter， and then press [SET/0~9] to choose division increment size. 9.8 On-rA (choose range of power on) When menu displays On-rA，press [TARE] to enter，press [SET/0~9] to choose 20 or 100, 20 is 20% max. capacity, 100 is 100% capacity. Press [TARE] to confirm.
- Page 8 IV. SCALE MAINTENANCE Take care not to overload the scale. Do not place heavy things on the scale violently. The damage for overloading is not within the range of the guarantee. Do not use sharp objects to operate the keypad. If the rubber is damaged it will influence the performance of the waterproof seal.