KLV-26HG2 UC Model SERVICE MANUAL SPECIFICATIONS VIDEO 3 IN: Television system: Y, P (Component Video ) IN : American TV standard Y: 1.0 Vp-p, 75 ohms Channel coverage: unbalanced, sync negative VHF: 2-13/UHF: 14-69/CATV: 1-125 : 0.7 Vp-p, 75 ohms Antenna: : 0.7 Vp-p, 75 ohms...
Page 2
Product Registratuin In standby: Less than 1W Optional accessorios: Note that some optional accessories may be out of stock. Headphones plug adaptor Connecting cables "Memory Stick" media Wall-Mount Bracket SU-LW1 Design and specifications are subject to change without notice. KLV-26HG2 (UC)
Page 3
VIEWS AND IN THE PARTS LIST ARE CRITICAL FOR SAFE OPERATION. REPLACE THESE COMPONENTS “pinched” or contact high-wattage resistors. WITH SONY PARTS WHOSE PART NUMBERS AP- 3. Check that all control knobs, shields, covers, ground straps, PEAR AS SHOWN IN THIS MANUAL OR IN SUPPLE- and mounting hardware have been replaced.
1-3. U1 BOARD REMOVAL Two screws (+BVTT 3x6) U1 board 1-4. MS AND MSB BOARDS REMOVAL Four screws (+PSW 4x10) VESA frame & bracket Two screws (+BVTT 3x6) MSB board Four screws (+BVTT 3x6) MS shield MSB board KLV-26HG2 (UC)
1-5. G1 BOARD REMOVAL Five screws (+BVTT 3x6) G1 board 1-6. A1, TU AND UD BOARDS REMOVAL UD shield case UD board Two connector screws Two screws (+BVTT 3x6) Two screws TU board (+BVTP 3x8) Four screws (+BVTT 3x6) A1 board KLV-26HG2 (UC)
• Items marked " * " are not stocked since they are seldom required for routine service. Some delay Les composants identifiés par la marque ! should be anticipated when ordering these items. sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. KLV-26HG2 (UC)
Les composants identifiés par la marque ! • F : nonflammable sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. When indicating parts by reference number, please include the board name. KLV-26HG2 (UC)