Page 1
BUBBLE MACHINE Z10/Z30 User’s instruction manual This manual contains important information about the safe installation and use of this product Please read this instruction manual carefully before installing or operating Please keep these instructions in a safe place for future...
Congratulations on the purchase of your Z10/Z30 bubble machine. With its one liter tank capacity and built-in fan, The Light Emotion Z10 will pump out enough bubbles to make magic happen, impressing all - particularly the children. Perfect for all kinds of functions including birthday parties, play rooms, school plays and much more.
• Turn off or unplug when not in use. • This machine is not water-proof or splash-proof. If moisture, water, or any liquid gets inside the housing, immediately unplug the unit and contact your Light Emotion dealer before using it again.
Page 4
FILL THE LIQUID 1. Ensure your bubble machine is unplugged from the mains electrical supply before attempting to open the housing. We take Z10 as an example. 2. To help avoid accidental exposure to dangerous live AC mains voltage, two safety screws are fitted that require a screwdriver to remove.
OPERATION: Connect power cable to the unit. Press the [POWER] button on the controller, both the Red LED and Green LED will illuminate, indicating that is ready for use. Function Hold [ON/OFF] Button The Greed LED on You will notice that the internal the top of ON/OFF bubble drum and fan are activated.