Guardian Mini 808A User Manual

GUARDIAN MINI 808A/808AP USER MANUAL
1
INTRODUCTION
Guardian Mini is a digital wireless personal tracking and locating device that keeps children, pets, keys and other
valuables close by your side. The Guardian Mini comes with a Base tracking unit and Tag unit that is attached to a
tracked item (e.g. children, keys). This product can alert you when the tracked item goes out-of-range and can search
for the item within a 1600 feet radius. A child or an elderly person can also press a panic button on the Tag unit to
call/alert the Base unit. The Guardian Mini is CE and FCC compliant.
Product Description
Front Back
2
3
4
5
1
1
2
3
4
6
5
Front
Back
Specifications
Model Name
Functions
Search Range
Near(Red LED) : 10±5m / 32±16 ft
Middle(Orange LED) : 20±10m / 64±32 ft
Configurable Safe Range Distances
Far(Green LED): 50±20m / 160±64 ft
Base Unit / Tag Unit Base (S08AM)x1
Battery Type
Battery Life Time on Standby
Beep Audible Level (at 10 cm / 3.9 inches)
Dimensions (L/W/H) / Weight
Temperature: 5
Operation Environment
Package Contents
Model Name 808A 808AP
1 pc 1 pc
Base Unit
1 pc
Tag Unit 1 pc
Batteries
CR2032x2
CR2032x2
Strap
1 1
Hook
1 1
Silicon Sleeve 1
User manual
1 1
Base Unit (blue)
1 Ring Attachment
2 Speaker Sound output
3 Connection Status LED Link status indicator between Base and Tag unit
Press to search for the Tag unit.
4
Search/Setting button
Press and hold to set "Safe Range" for Tag unit.
6 5 Power Switch Power ON/OFF
6 Battery Cover
Tag Unit (red)
1 Ring Attachment
2 Speaker
Sound output
3 Link status indicator between Base and Tag unit
Connection Status LED
4 Panic Button Call/Alert the Base unit
5 Power Switch Power ON/OFF
6 Battery Cover
808A/808AP ( 1 to 1)
Search & Out-of-Range Alert
0~500m / 1,600 ft
Tag (S08AS)x1
CR2032
30 days (8 hrs/day)
95 dB
2.42x1.42x0.46 inches / 9.5g
40 humidity:20 80
How to apply/wear the Base and Tag units
Base Unit
Page 1
GUARDIAN MINI 808A/808AP USER MANUAL
2
GETTING STARTED (Out-of-range Alert)
This section shows how to quickly setup and trigger an alert condition when the Base unit is separated from the Tag unit.
1. Insert the batteries into the Base unit and the Tag unit. (As picture1)
a) Slide out (remove) the battery covers on the Base and Tag Units.
b) Insert batteries (included) with the "+" mark facing upward in
the battery compartments.
c) Replace the battery compartment covers on both units.
2. Make sure that the Base and Tag units are in close proximity.
3. Turn ON the Power switch on both the Base and Tag units. Both
units will establish a link and begin to blink synchronously. (As picture 2)
4. Place the Tag unit in a stationary location. With the Base unit in hand, walk away from the Tag. At about 32 feet, both
Base and Tag units will begin to beep and flash, indicating an out-of-range alert condition. (As picture 3)
5. Return to the Tag unit location and the alerts will cease. Please skip to item 7 if your model is 808A.
Tag Unit
6. Place the Tag into the provided silicon case and attach the case using the ventilation openings at the bottom onto the
Pet's collar (As picture 4) . If the Collar is too wide to fit into the Silicon case vents please use the provided Velcro
strap on the larger collar and fit the case onto the strap. (As picture 5)
7. Congratulations, now you are ready to attach your Tag unit to the item you want to track (e.g. kid, pet, keys).
Additional Out-of-range Alert notes
a) When the Tag Unit is within the safe range, the lights on the Base and Tag units blink dimly at regular intervals,
indicating an active link between Base and Tag units – this is referred to as "Standby Mode".
b) When the Base loses the signal to a Tag unit (i.e. out-of-range), the Base unit beeps for 10 seconds and the
the Tag unit beeps for 15 seconds. If the Base unit and the Tag unit are not reunited, both units go into Sleep Mode
after 10 and 15 seconds respectively. However, the Base unit will intermittently beep until the link is re-established
with the Tag unit (see below).
c) When the Tag unit is once again reunited with the Base Unit, press the Search/Setting button on the Base
unit (Base unit will enter Search mode). Press the Base unit button a second time to re-establish the link.
Tag Unit Setting Safe Range distances for the Tag unit
You can set the safe range distances for the Tag unit to Near (32 ft / 10m), Middle (64 ft / 20m) or Far (160 ft / 50m) -
the factory setting is for 32 ft.
1. Press and hold the "Search/Setting" button on the Base unit - notice how the LED changes from Red, Orange and
Green. Red represents "Near", Orange "Middle" and Green "Far".
2. When the LED shows the color (i.e. distance) you want to set, simply release the button to set the option.
Note that when you are in Standby mode, the Base Unit LED will blink the color of the safe distance that you set.
Base Unit
32 Feet
Picture 3 Picture 4
Page 2
b
On/Off switch
Picture 1 Picture 2
Picture 5