Download Print this page
NightStick NSR-9910 Operating Instructions

NightStick NSR-9910 Operating Instructions

Flashlight, floodlight, dual-light, strobe rechargeable personal, patrol size flashlight

Advertisement

Quick Links

Operating Instructions for Models
NSR-9910 / 9912 / 9914
Flashlight • Floodlight • Dual-Light • Strobe
Rechargeable Personal / Patrol Size Flashlight
Multiple Patents Pending
INS-9910-12B
CAUTION: DO NOT use in explosive atmospheres, near flammable liquids,
or where explosion proof lamps are required
DO NOT use in the proximity of vehicles or equipment when there is a risk of flammable
liquids coming into contact with the flashlight.
WARNING: NOT FOR USE ABOVE HAZARDOUS LOCATIONS
Thank you for selecting this Nightstick product. Save this instruction.
Please read these instructions before using your Nightstick. It includes
important safety and operation information. Be sure to charge the Nightstick
fully before the first use. A battery is fully charged when the charger light is
green.
Record the serial number and
date of purchase in the space
provided on the back. Then
register your Nightstick online
for warranty coverage. See
information below.
Record the serial number and
date of purchase in the space
provided below.. Then register
your Nightstick online for
warranty coverage. See
information below.
Items in the box
CHARGING
Initial Use
Fully charge the Nightstick before the first use. If the battery is new or has been
unused for several months, several charge and discharge cycles may be
needed to reach full battery capacity. To reach maximum performance, run the
light to completely discharge the battery and then recharge. Each charge cycle
will extend the operation time until maximum capacity is achieved. The charge
time for maximum capacity is approximately 3 hours.
Regular Use
Use only the supplied Nightstick charge platform, battery and AC or DC
adapter. The maximum allowable DC input is 15VDC.
 For best performance, charge the Nightstick when the LED's start to dim.
 Connect the AC power adapter to the charging platform. The green
indicator will light.
 With the floodlight facing forward, slide the Nightstick into the charging
platform until the contacts snap into place.
 The red light on the charging platform indicates the Nightstick is properly
inserted into the charging platform and charging. The light remains red until
the battery is fully charged. At full charge, the light turns green. The total
time to full charge varies depending on the remaining charge in the battery
pack.
 The charging platform provides a trickle charge to a fully charged battery
pack.
BAYCO • 640 South Sanden Blvd. • Wylie, TX 75098 • 1-800-233-2155 • 00+1+ 469-326-9400 • www.baycoproducts.com
PERFORMANCE ALL MODELS
LIGHT MODE
Lumens
FLASHLIGHT • Momentary
FLASHLIGHT • Constant
FLOODLIGHT • Constant
DUAL-LIGHT • Flashlight &
Floodlight
FLASHLIGHT STROBE
SAFETY
CAUTION BRIGHT LED RADIATION: AVOID DIRECT EYE EXPOSURE.
Nightstick is a Class 2 LED product per IEC 60825-1 Edition 1.2.2001.
 Do not use or charge this Nightstick in explosive or hazardous areas.
 Do not attempt to repair or disassemble the Nightstick, the charger
platform, battery or the power supply.
 Use only the Nightstick charging platform, AC or DC adapters and battery
pack.
 Using this Nightstick product for other than a lighting device is not
recommended. Bayco specifically disclaims liability for other than intended
use.
OPERATION of NSR-9910 / 9912 / 9914
There are two Nightstick product configurations. Both have the Flashlight •
Floodlight • Dual-Light • Strobe modes. For maximum user safety the flashlight
and floodlight can operate simultaneously in the Dual-Light mode. The strobe
flashes at approximately 2 flashes per second.
 NSR-9910 / 9912: Single body switch
 NSR-9914: Dual-Switches. Tandem control.
NSR-9910 / 9912 - Single body switch
The five light modes are controlled by the body switch. After being in any mode
longer than 3/4 second: The next press turns the light OFF. The strobe-light
function overrides any other mode. Strobe is accessed from any mode. Lightly
press the body switch for momentary flashlight operation.
First Press – Flashlight On
Second Press – Floodlight On
Third Press – Dual-light On
Fourth Press – All Off
Press and Hold– Strobe On
Press Again – Strobe Off
NSR-9914 – Dual Switches. Tandem control
The five light modes are identical to the NSR-9910 / 12 and controlled by either
the body or tail switch. Lightly press the body or tail switch for momentary
flashlight operation.
NiMH
Lithium CR123
Run-time
Lumens
Hrs
220
5
220
220
5
220
180
5
180
230
5
230
220
16
220
Run-time
Hrs
2
2
2
2
7

Advertisement

loading

Summary of Contents for NightStick NSR-9910

  • Page 1 CHARGING Initial Use Fully charge the Nightstick before the first use. If the battery is new or has been unused for several months, several charge and discharge cycles may be needed to reach full battery capacity. To reach maximum performance, run the light to completely discharge the battery and then recharge.
  • Page 2 Potassium hydroxide, hydrochloric acid, sulfuric acid, isopropyl alcohol, Freon, gasoline, kerosene, diesel fuel, antifreeze, hydraulic fluid and  A new Nightstick or one that has not been used for a long period of time, others. Avoid prolonged exposure and clean immediately.

This manual is also suitable for:

Nsr-9912Nsr-9914