KEPCO DIN MRW-160P Instruction Manual

I N S T R U C T I O N M A N U A L
KEPCO
FOR SERIES MRW 150/151KV, 160/161KV, 170/171KV
DESCRIPTION. Kepco KITs, Models DIN MRW-150P, MRW-160P and MRW-170P each contain a cover, a cable kit, a
mounting bracket with left and right preassembled mounting clips and associated hardware used to install MRW Series
power supplies on a DIN rail. The -150P suffix is for the 35 Watt MRW 150/151KV models. The -160P suffix is for the
50 Watt 160/161KV models. The -170P suffix is for the 65 Watt MRW 170/171KV models. The "P" suffix is for mount-
ing the power supply perpendicular to the DIN rail as shown in Figure 1. Outline Dimensions are shown in Figure 5
CABLE
KIT
MODEL NO. PART
DIN MRW-150P 219-0184
DIN MRW-160P 219-0184
DIN MRW-170P 219-0239
KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL (718) 461-7000 " FAX (718) 767-1102
©2000, KEPCO, INC
Data subject to change without notice
An ISO 9001 Company.
DIN-RAIL MOUNTING KIT
FIGURE 1.
TABLE 1. COMPONENTS SUPPLIED
COVER MOUNTING
KIT
PART BRACKET
NO. PART NO.
NO.
CA 19
CA 20 128-2048
CA 20
http://www.kepcopower.com " email: hq@kepcopower.com
P SUFFIX ORIENTATION
SCREW WASHER
(QTY 4) (QTY 4)
(Power Supply (Power Supply
To Mounting To Mounting
Bracket) Bracket)
PART NO. PART NO.
101-0383 103-0017
(8-32 X 3/16 (NO. 8, INT.
PHPH) TOOTH)
228-1405
KIT
DIN MRW-150P,
-160P, -170P
SCREW
CLIP Thread-form
CLIP
PLATE (QTY 4)
(QTY 2)
(QTY 2) (Clip To
PART
PART Mounting
NO.
NO. Bracket)
PART NO.
101-0443
108-0362 128-1938 (4-40 X 1/4
BHPH)
WASHER
(QTY 4)
(Clip To
Mounting
Bracket)
PART NO.
103-0014
(NO. 4, INT.
TOOTH)
1