Advertisement
Quick Links
Thank you for purchasing the KCS6104/6116 console server. This Quick Start walks you
through installation, configuration and local operation. For more details please refer to
User Manual
the
Step1
KCS6104/6116
KVM console server
Step 2
Plug the console server into the AC
mains
Attach any serial or USB devices and
connect the KCS6104/6116 to your
management network
Attach any local screen/ keyboard/
mouse (LCD drawer or KVM switch)
Note:
If you plan to use out-of-band (OoB) dial-in access the LOCAL serial port can
be connected to an external modem
Step 3
The default console server IP address is
With a web browser on any computer that is LAN connected to the console server:
Enter https://192.168.0.1 and log in using the default system user name
and the default password
configuration steps is displayed
KCS6000 Quick Start (520023-Rev 3.2)
on the CDROM.
Check kit contents
UTP cable(s) and DB9F-RJ45S
straight and cross-over
Connect the hardware
Set up the console server
KCS6104 & KCS6116
Quick Start Guide
This Quick Start
192.168.0.1
(subnet mask
default.
A Welcome screen listing the basic
Power cable
& CD-ROM
255.255.255.0
).
root
Page 1
Advertisement
Related Manuals for Opengear KCS6104
Summary of Contents for Opengear KCS6104
-
Page 1: Quick Start Guide
KCS6104 & KCS6116 Quick Start Guide Thank you for purchasing the KCS6104/6116 console server. This Quick Start walks you through installation, configuration and local operation. For more details please refer to User Manual on the CDROM. Step1 Check kit contents... - Page 2 Step 4 Configure local thin client access Configure any of the KCS6104/6116 thin clients you will be using (e.g. Terminal, HTTP, HTTPS, VNC, RDP, IPMI) with details of the networked devices they will be accessing: Select Connect: Add/Delete/Edit on the control panel and for each selected ...
- Page 3 Host The four (KCS6104) or sixteen (KCS6116) serial ports are all pre-configured by default in Console Server Mode with RS232 settings of 9600 baud, no parity, 8 data bits and 1 stop bit.
- Page 4 Install the SDT Connector java application on your remote management computer and set up the KCS6104/6116 as a gateway (entering the IP or DNS Address, the SSH port and Username and Password) Click Retrieve Hosts and SDT Connector will auto load any limitations you may ...