Download Print this page

Perfect Water Technologies Home Master Standard RO Service Manual

Reverse osmosis system

Advertisement

Quick Links

Home Master® Reverse Osmosis System—Owners Manual
10 Tips for an Easy and Successful Installation
1.
Keep it simple - there are 4 connections to make, and the tubing is color coded.
VIDEO INSTRUCTIONS ARE AVAILABLE ONLINE (6 PARTS)
2.
Have plenty of time, light, space, and towels before getting started. If everything goes well,
you should be done in 45 minutes. However, if your feed water line is a different size, or if you
don't have an extra hole for the faucet, it can take somewhat longer.
3.
NEVER use plumber's putty, thread-lock, or anything else you wouldn't eat on any part of
this system. You may use as much white Teflon plumber's tape as you like. If you use plumber's
putty on your faucet, you will have disgusting and potentially toxic water for the life of the fau-
cet.
4.
Mount the faucet first, and when making the final connection, use the quick connect faucet
adapter found in the bag of parts with the EZ adapter, tank valve, and drain clamp.
5.
If you have a 3-hole sink and want to avoid drilling a 4
single handle kitchen faucet. This will free up 2 holes, one of which you may use for the RO fau-
cet, the other you can use for a soap dispenser or side sprayer.
6.
Mount the Home Master® RO vertically so that the blue cap is on top. There is only one "blue
cap" and it has only one fitting at its top. Mount the (optional) permeate pump correctly or noth-
ing will work. There is a long arrow on the permeate pump, make sure it points up.
7.
Mount the drain saddle on a vertical section of drain pipe. IF you have to mount the drain
saddle on a horizontal section, then drill the hole on the top side of the pipe or at least at an an-
gle where the drain water from the Home Master® RO drops down into the drain pipe. [Think of
a manhole passage into the sewer] When making the connection from the system to the drain
saddle - wrap the tubing around the drain pipe a few times, so that some loops of tubing are
higher than the fitting.
8.
DO NOT touch the air nipple on the side of the reserve tank. You may be tempted to check
the pressure, or pump it up – don't. It already has plenty of air. Adding more will not boost flow,
it will only decrease tank capacity.
9.
Read the instructions thoroughly before beginning. There is a lot of information there, some
of which you may not need for your application. If you have questions – call or email. Email will
usually be answered within hours even at night.
10.
Have patience. Your new Home Master® RO may take some time to break in and start flow-
ing. Make sure you fill, and drain, the reserve tank at least twice.
TUBING COLOR CODING
ORANGE—LINE IN
RED— TO DRAIN
Page 16
Customer Service Hotline 1-877-693-PURE
th
hole for the RO faucet, then get a
BLACK—TO STORAGE TANK
BLUE—TO RO FAUCET
Perfect Water Technologies, Inc.
Copyright © 2014
Perfect Water Technologies
Home Master
Reverse Osmosis System
Installation & Service Manual
®
Home Master
Standard RO
Home Master
®
Artesian Full Contact
®
Home Master
IRON
®
Home Master
UV
®
Home Master
ULTRA
Home Master
®
HydroPerfection
Customer Service Hotline 1-877-693-PURE
®

Advertisement

loading

Summary of Contents for Perfect Water Technologies Home Master Standard RO

  • Page 1 Make sure you fill, and drain, the reserve tank at least twice. TUBING COLOR CODING ORANGE—LINE IN BLACK—TO STORAGE TANK RED— TO DRAIN BLUE—TO RO FAUCET Perfect Water Technologies, Inc. Copyright © 2014 Page 16 Customer Service Hotline 1-877-693-PURE Customer Service Hotline 1-877-693-PURE...
  • Page 2: System Location

    Home Master® Reverse Osmosis System—Owners Manual Home Master® Reverse Osmosis System—Owners Manual Home Master ® RO Contents: Assembled RO filter cluster Storage tank Tank valve Drain saddle & gasket Roll Teflon tape Mounting clips & screws Chrome long reach RO faucet (or custom faucet); faucet adapter fitting and hardware.
  • Page 3 Home Master® Reverse Osmosis System—Owners Manual Home Master® Reverse Osmosis System—Owners Manual Drilling hole for RO faucet – porcelain sinks steps 1-5; stainless sinks steps 3-5 WARNING: Serious cracking and damage may occur to your sink even if instructions are followed exactly due to age and the imperfections inherent in natural materials.
  • Page 4 Home Master® Reverse Osmosis System—Owners Manual Home Master® Reverse Osmosis System—Owners Manual Installing The Home Master® Reverse Osmosis System 1. Mount RO Faucet 1. Use existing spray hose hole, or Drill 1/2” hole in sink top. See page 3. 2. Slide escutcheon plate onto faucet shank. 3.
  • Page 5: Using Quick Connect Fittings

    Home Master® Reverse Osmosis System—Owners Manual Home Master® Reverse Osmosis System—Owners Manual 3. Install drain saddle clamp and drain line – Identify a USING QUICK CONNECT FITTINGS vertical section of drainpipe with enough space to mount the drain saddle clamp. NOTE: A horizontal section of pipe is less desirable but can be used provided the drain saddle opening flows downward into the pipe, like a manhole drops down into the sewer.
  • Page 6 Home Master® Reverse Osmosis System—Owners Manual Home Master® Reverse Osmosis System—Owners Manual holes free from splinters and sharp edges. [Alternate route for refrigerator line -- run ¼” refrigerator tubing along the baseboard, and enter the kitchen sink cabinet by drilling a ¼” opening in the bottom board of your kitchen sink cabinet, towards the front baseboard.] Push tubing through the cabinetry holes from the Home Master®...
  • Page 7: Tubing Color Coding

    Home Master® Reverse Osmosis System—Owners Manual Home Master® Reverse Osmosis System—Owners Manual check each connection point until you find the blockage point. At each point - turn off the 7. Connect drain line tubing — Locate the black plastic nut found in drain saddle parts bag. water at the EZ adapter and tank, and briefly turn on the RO faucet at the sink to relieve any system pressure.
  • Page 8: Troubleshooting

    Home Master® Reverse Osmosis System—Owners Manual Home Master® Reverse Osmosis System—Owners Manual Troubleshooting few things you can do. A) Disconnect the red drain line from the drain saddle, adjust the red IMPORTANT NOTE: Before performing service on the Home Master® RO at any time, and tube protruding from the nut (add a little more or reduce it), while ensuring there is at least for any reason: first close all under-sink water valves, except for the RO faucet, which you some visible red tube protruding, and reconnect.

This manual is also suitable for:

Home master artesian full contactHome master ironHome master uvHome master ultraHome master hydroperfection