1. Introduction Thank you for purchasing Wild Tech’s Fiesta. Fiesta is a high output special event projector, equipped with 12 event gobos. It offers the choice of stop, continuous or sound activation, satisfying all applications. The unit is perfect for discos, clubs, bars, and parties.
Page 4
♦ In the event of serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center. Always use the same type spare parts.
6. ¼” jack used to connect the optional CA-8 controller. 7. Cooling fan 4. Operation and Technical Specification • Plugging into the mains power, the fixture starts running. The Fiesta runs in automatic or sound activated mode. • Fan cooled and thermal switch for overheat protection.
5. Lamp installation or replacement • Always switch off the mains supply and never handle the lamp or luminaire when it is hot. • Do not touch the bulb with bare hands. If this does happen, clean the lamp with denatured alcohol and wipe with a lint free cloth before installing.
7. Troubleshooting Problem Probable cause(s) Suggested remedy No light No power to the fixture Check power connections Blown fuse If power is applied but does not light, please check and replace fuse if necessary. Burned out lamp Install new lamp. Fixture too hot Allow to cool down.
8. Fixture Cleaning The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics.