Advertisement
Quick Links
luxEAIr 35 MOTIF
luxEAIr SErIES
Deck Width
Blower
2 3/4"
Back Angle
24˚
Pump
59 1/2"
65 3/4"
SPECIFICATIONS:
GeneRal SPecIfIcatIonS:
Tub Size
65 3/4" x 42 1/2" x 24 1/4"
167 cm x 108 cm x 62 cm
Bathing Well
35" long
25 1/2" wide
21 1/4" interior depth
Maximum Water Depth 17"
Shipping Weight
236 lbs. / 107 kg
Tub Weight Filled
930 lbs. / 422 kg
Tub Only Weight
101 lbs. / 46 kg
Weight w/Equipment
158 lbs. / 72 kg
Gallons to Overflow
93 gal. / 352 L
Gallons to Operate
1 bather: 74 gal. / 280 L
2 bathers: 55 gal. / 208 L
electRIcal SPecIfIcatIonS:
Pump
1.75 HP; 12 AMP; 110V
Inline Heater
1.5 kW; 12.5 AMP; 110V
Requirement
1-15 AMP 2 pole, separate circuit
required protected with Class A GFCI
Blower
1 HP; 10.5 AMP; 110V
Requirement
1-15 AMP 1 pole, separate circuit
required protected with Class A GFCI
This whirlpool will need to be hard wired to the breaker box.
Three outlets will be supplied on the whirlpool.
This unit is not recommended for shower installations.
fax-on-Demand
Document # 1293
The manufacturer accepts a 1/4" variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub;
Aquatic Industries, Inc. assumes no responsibility for preparatory work.
Model # AI35lUX6642 / AI30AIR6642To (Tub only)
Total Width
Back Angle
22˚
5 1/4"
42 1/2"
21 1/4"
62"
StanDaRD equIPMent:
9 Hydrotherapy Jets including:
- 4 Full Size Pressure-Flo Hydrotherapy Jets
- 2 StressEaz Neck & Shoulder Therapy Jets
- 3 Recessed Rotary Massage Jet
air Bath System:
- 30 Air Jets
- 1 HP Variable Speed Air Blower with 20-Minute Timer
- Electronic Control Panel
- 3 Massage Settings: Constant, Wave and Pulse
- Automatic Purge and Dry Cycle
- 600 Watt Air Heating System
aquatic quality features:
- 1.75 HP Run-Dry Pump with 20-Minute Timer
- 1.5 kW Inline Maintenance Heater
- "Quiet Pad" Anti-Vibration Pump Mount for Quiet Pump Operation
- Slip Resistant Floor
- Pre-leveled ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
ul & IaPMo listed, factory tested
limited lifetime Warranty
42 1/2"
24 1/4"
21 3/4"
39 1/2"
oPtIonal equIPMent:
•
•
•
•
•
•
•
•
All acrylic colors featured by Aquatic match the
industry's leading fixture manufacturers.
Two Person Bath
Rough-In Plumbing
Measurements
3 1/2"
Chromatherapy LED Lighting
Comfort Pillow - Oval or Rectangle
Jet Finish
- Chrome, Polished Brass, Gold, Polished Nickel
or Satin Nickel
Bolt-On Grab Bar
- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze
Lift & Turn Waste and Overflow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
Cable Drive Waste and Overflow
- Chrome, Polished Brass, Gold, Polished
Nickel, Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit Only)
Hand Held Jet - Chrome or Polished Brass
Premium Colors
www.aquaticwhirlpools.com
July 2008
12 1/2"
800.555.5324
Advertisement
