Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
Product
Notepad™V - Universal Cradle & Accessories
7160-0250 Notepad™V Universal Cradle
7160-0250-01 Notepad™V Universal Cradle w/Tall Side Clips
7160-0250-02 Notepad™V Universal Cradle w/Zero Edge Side Clips
7160-0251 Screen Support Assembly
7160-0252 LED Light Assembly
7160-0253 Mic Clip Assembly
7160-0250 Notepad™V Universal Cradle w/Standard Side Clips
7160-0250-01 Notepad™V Universal Cradle w/Tall Side Clips
7160-0250-02 Notepad™V Universal Cradle w/Zero Edge Side Clips
Notepad™V Universal Computer Mounts 7160-0250 & 7160-0250-02, will accommodate
computers 10.62" to 16.50" in width, 9.00" to 12.00" in depth and up to 1.50" thick.
Notepad™V Universal Computer Mount w/Tall Side Clips 7160-0250-01, will accommodate
computers up to 2.00" thick.
The Notepad™V hold-down clips and key lock are designed to securely hold the laptop
in the mount and deter theft, not prevent it. Gamber-Johnson recommends taking your
laptop out of the vehicle when not in use.
9/64" Hex (Allen) wrench is needed to adjust clip location and position.
7/16" Wrench or Socket is need to attach Notepad™V to Gamber-Johnson Motion Attachments.
#2 Phillips screwdriver and a 9/64" Hex (Allen) wrench are need to mount accessories.
Vinyl Cap
Side Clips
Vinyl Cap
Flat Front Clip
Clip Guide
Product Mounting Disclaimer
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© copyright 2011 Gamber-Johnson, LLC
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Tee Nut
Offset Front Clip
Revision
Rev. F
Rear Clip
Rear Support and Brace
Deck
Form
INST-479
Printing Spec:
PS-001
Lockable Latch
1 / 5
Advertisement
Summary of Contents for Gamber Johnson 7160-0250
- Page 1 Notepad™V Universal Computer Mounts 7160-0250 & 7160-0250-02, will accommodate computers 10.62" to 16.50" in width, 9.00" to 12.00" in depth and up to 1.50" thick. Notepad™V Universal Computer Mount w/Tall Side Clips 7160-0250-01, will accommodate computers up to 2.00" thick.
-
Page 2: Vehicle Mounting
Rear Support Assembly Two Rear Support Clips must be assembled at the time of installation. Attach each Support Bracket to Tee Nut located in channel on back edge of Notepad™V using a #8-32 x .38 Socket Head Screw. Attach the Rear Clip to the Support Bracket with a #8 external tooth washer and a #8-32 x .31 Nylon Patch Socket Head Screw. - Page 3 Eight Vinyl Caps are included in hardware bag to place over clips to protect computer if needed. (Zero Edge Side Clips 7160-0250-02, are used without caps) Place the computer on the Notepad™V deck Slide the computer tight against the Front Clips.
- Page 4 Notepad™V Accessories Screen Support Assemblies The 7160-0251 Screen Support Assembly can only be attached to the right side on Notepad™V. The 7160-0474 Screen Support Assembly can only be attached to the left side on Notepad™V Remove the two Phillips Flat Head Screws found. at the back right or left side corners (Depending on which Screen Support Assembly you are using).
- Page 5 Notepad™V Accessories Cont. 7160-0252 LED Light Assembly The LED Light Assembly can be mounted on any corner of the Notepad™ V Cradle. Remove the two Phillips Flat Head Screws found on the corner. Place the LED Light Assembly over the holes and attach using two #8-32 x .62 Socket Head Screws and two #8 Flat Washers.