1, 9 Molded Stone Assembly 4, Single Stones NOTE: When installing the BLCS or BLCS3 Stone Kit, you must also use the GLB/S/E/O/D Reflective Glass Kit. The Model 300 fireplaces require 1 glass kit, the Model 400 & 500 fireplaces require 2 glass kits.
Page 2
Figure 2 2. Place stone #2, flat side down, on right side against the stone assembly. (Fig. 2) KT514 Stone #2 Figure 3 3. Place stone #3, flat side down, next to stone #2 against stone assembly. (Fig. 3) KT515 Stone #3 Figure 4 4.
Page 3
Figure 5 5. Place stone #5, flat side down, next to stone #4 against stone assembly. (Fig. 5) KT517 Stone #5 Figure 6 6. Place the GL glass media (purchased separately) over the floor and on burner in between and behind rocks covering all ports.