Advertisement
Quick Links
SET UP INSTRUCTIONS FOR THE LORICRAFT AUDIO RECORD CLEANING SYSTEM
1. Remove the machine and accessories from shipping carton. Be careful to avoid any damage to vacuum arm and the smaller parts.
2. Place the machine on a level surface where you intend to operate the machine.
3. Place the fluid jar on the machine base and secure the jar with the elastic "hooked" spring cord. See photo for placement.
4. Connect the large 6mm clear tubing to the inlet fitting on the side of the machine base. The other end of the tubing is already connected to jar lid.
The 6mm tubing will fit only one of the nipple fittings on the top cover of the jar.
5. Connect the 3mm clear tubing to the smaller nipple on the jar lid. The other end is already attached to the arm. Rotate the jar until the 3mm tubing
is to the rear of the base cabinet. The elastic cord jar retainer will hold the jar in place for easy removal in the future.
6. Switch on the vacuum pump and draw the nylon thread into the fluid evacuation jar. You should see a few inches of thread in the jar before
starting to clean records. As you use the thread the spent thread will be sucked into the used fluid jar.
7. Balance the arm as you would a phono pickup arm by adjusting the weight on the end of the arm. Use just enough weight to keep the arm from
bouncing. The ideal weight is about 2.5 grams and can be set with the same stylus pressure gauge you use for your phono tonearm.
Advertisement
Summary of Contents for Loricraft Audio LORICRAFT AUDIO RECORD CLEANING SYSTEM
- Page 1 SET UP INSTRUCTIONS FOR THE LORICRAFT AUDIO RECORD CLEANING SYSTEM 1. Remove the machine and accessories from shipping carton. Be careful to avoid any damage to vacuum arm and the smaller parts. 2. Place the machine on a level surface where you intend to operate the machine.
-
Page 2: Operation
8. When the weight adjustment is correct, lock the weight with the Allen key that is supplied with the machine. You are now ready to clean records! OPERATION Most of the popular record cleaning solutions that are designed for "wet machine" use will produce good results with the Loricraft Audio Cleaning System. -
Page 3: Maintenance
The highest quality industrial grade components are used in the construction of the Loricraft Audio Cleaning System. The machine will last many, many years and provide reliable service. In the unlikely event service is ever needed in North America contact SMART Devices, Inc. by phoning our toll free number (800) 45-SMART or FAXing (678) 349-0672. - Page 4 If you splash cleaning fluid on the top cover there may be some light residue when the fluid dries. Spray a household window cleaning solution on the top cover and wipe dry with a soft cloth or paper tissue (Kleenex). This will keep the top cover shiny and new looking. Rubber boots on the switches keep liquid from penetrating the switch mechanism.
- Page 5 Martina Schöner, the European representative for Loricraft from Germany. The Loricraft Audio Record Cleaning System provides the very best cleaning results of any machine, even products costing more than twice as much. Once a record has been...
- Page 6 You may consider purchasing anti-static record sleeves to replace the paper sleeves furnished by the record companies. This will protect the investment you have in your record collection and provide clean musical enjoyment for years to come. Nothing cleans Records more thoroughly than the Loricraft! SMART Devices, Inc. 2009 © SMART Devices, Inc. Back to Loricraft Audio main page.