Undermount Sinks Installation Instructions and Use & Care Guide Part No. 8534965 For installation with solid surfaces ™ Quick Reference Table of Contents: Pages 2 Tools and Parts 2 Installation Requirements 3 - 4 Installation Instructions 5 Use & Care Guide...
Installation requirements... The KitchenAid™ Undermount System is based on installing Undermount Series sinks, including the plywood reinforcement sheet (sink support), with the countertop at the fabricator’s shop. Tools and Parts: Assemble the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
Failure to do so will void the warranty. • Installation of all KitchenAid™ Undermount sinks is based on “sandwiching” the rim of the sink between the countertop and 1/2” plywood reinforcement sheet (sink support).
Page 4
Create sink support Prepare minimum 1/2” plywood sheet (sink support) by cutting to dimensions of cabinet it will be mounted to. Secure 1/2” plywood sheet (sink support) to work surface using various clamps. Fasten the female template (plywood) to the 1/2” plywood sheet (sink support).
For the lifetime of the product from the date of purchase, when this sink is installed, operated and maintained according to instructions attached to or furnished with the product, KitchenAid will replace sinks found to be defective in materials or workmanship with an equivalent stainless steel sink supplied by KitchenAid.
For further assistance If you need further assistance, you can write to KitchenAid with any questions or concerns at: KitchenAid Brand Home Appliances Customer Interaction Center 553 Benson Road Benton Harbor, MI 49022-2692 Please include a daytime phone number in your correspondence.