Page 2
Your INALSA Halogen Heater has a lot of thoughtful features built in to make your living convenient. Please read these instructions carefully, so that you may get the best out of the power packed features in your INALSA Halogen Heater.
Part No.P arts Name Heat Selector switches Body frame Heating element Safety grill Base plate Technical Specifications * Model Mercury Mercury Dx Wattage 1200W (400W+400W+400W) Voltage 230V, 50Hz, AC Plug 3 Pin moulded plug PVC cord Oscillation Available Tip over switch...
Do's 1. Read all instructions before use. 2. The appliance must be placed on a flat and stable surface. 3. Keep combustible material such as furniture, cushions, bedding, paper, clothes, curtains etc. at least 100 cm away from the heater. 4.
Secure the body frame on the base plate with the two mounting screws removed earlier. Insert the power cord through the suitable slots and then fix it by using the clamp. Before first use Before switching on the appliance check if the electrical voltage and frequency of the circuit correspond to those indicated on the appliance.