Advertisement
Quick Links
By fitting optional equipment this product can operate automatically under normal running
conditions. The optional controls fit within the casing of the unit & are supplied with easy to fit fixing
instruction.
Thermostat Control T1 & Automatic Speed Change T2 Thermostat Kit TCAS T12
An adjustable room thermostat (T1) located in the incoming air provides constant room temperature
control.
To provide rapid warm up the Automatic speed change thermostat (T2) switches fan(s) between 2
selected speeds at any predetermined temperature setting (generally a difference of between 3-6
degrees lower than that of T1 is used).
The constant temperature control is then maintained by the T1 room thermostat.
Adjustable LTC Kit ALTC T3
This enables the end user to precisely select the temperature at which the fans switch on when
combined with different heat sources.
Air inlet Filters for all Models.
For Accessories or Spares please contact your supplier.
Products with this symbol (crossed out wheelie bin) cannot be disposed as household waste. Old
electrical and electronic equipment must be recycled at a facility capable of handling these products
and their waste by-products. If you are purchasing replacement equipment your retailer may offer a
'take back' scheme, or will be able to give details of the nearest approved authorised treatment
facility. Proper recycling and waste disposal will help conserve resources whilst preventing
detrimental effects on our health and the environment.
WEEE Registered Code: WEE/ED0093VW
Smith's Environmental Products Ltd,
Blackall Industrial Estate, South Woodham Ferrers, Chelmsford Essex CM3 5UW
Tel: 01245 324900 After Sales: 01245 324560 Fax: 01245 324422
E-mail: info@smiths-env.com Web: www.smiths-env.com
For Ireland (Republic & Northern), contact MT Agencies on 00 353 1 864 3363
In light of our policy of continuous development Smith's Environmental Products Ltd reserve
the right to alter specifications without prior notice.
Iss: 3
Accessories
8
Caspian 60, 90 & 120 Series
Low Level Fan Convector
Installation & User Guide
May 2013
Advertisement
Related Manuals for Smith's Heating First Caspian 60
Summary of Contents for Smith's Heating First Caspian 60
- Page 1 T1 is used). The constant temperature control is then maintained by the T1 room thermostat. Caspian 60, 90 & 120 Series Adjustable LTC Kit ALTC T3 This enables the end user to precisely select the temperature at which the fans switch on when Low Level Fan Convector combined with different heat sources.
- Page 2 Introduction Fault Finding These heaters are primarily intended for installation onto a wall at low level. We recommend 1. Fan does not run on any switch setting, that this heater is stood on the floor and fixed to the wall. They must not be installed in a.
- Page 3 4. Check for water leaks. Remove any trapped air from the unit via the built in bleed screw located as shown in the diagram below. Caspian Model Transformer Tappings Caspian 60 Caspian 90 Caspian 120 Line Speed...
- Page 4 High Medium fused spur must not be directly above the heater and must be accessible after the installation is complete. All electrical work should be carried out in accordance with Caspian 60/03 current IEEE regulations. Caspian 60/04 Caspian 90/06 Caspian 90/07 Caspian 120/10 12.5...