Summary of Contents for D-Teg 2.4GHZ Digital WirelessMicrophone System
Page 1
2.4GHZ Digital Wireless Microphone System USER GUIDE...
Page 3
DESCRIPTION Docking Station (Receiver) Antenna Connector Terminal for charging Green LED: In-use (Record) Audio Out cable Red LED: Charging Green LED: Fully charged Transmitter Green: In-use (Light On) REC Button ON (Flashing) REC Button OFF (Light On) Red LED: Low Battery RED LED: Out of Range REC Button EMG Button (Trigger 2)
1. QUICK SET UP AND OPERATION Synching Up the Transmitter and Receiver The synch operation only needs to be performed the first time a system is used, or a new Transmitter is used with a Receiver previously synched to another Transmitter. Do not perform the synch operation multiple times;...
3. GUIDELINES AND RECOMMENDATIONS FOR BEST PERFORMANCE Compatibility The transmitter and receiver must synchronize to work together (see Synch process on page 3). The synch operation only needs to be performed the first time a system is used, or when a new Receiver is used with a Receiver previously synched to another Receiver.
4. TECHNICAL SPECIFICATIONS RECEIVER BASE STATION Controls Video Trigger Active +12/GND Indicators INUSE LED: GREEN CHARGE LED : CHARGING -> RED FULL CHARGED -> GREEN RECORD LED GREEN FLASHING Connections In Car Mic. 2.5mm Mono Plug Un-terminated Cord +12V DC Power BLUE Record Trigger out (Record on =DC12V, OFF= GND) YELLOW...
Transmitter with internal microphone, battery, belt clip 2400 R Receiver and recharge station, RJ45 cable 2400 ANT External ANT – 10Feet PWC-24 Optional TX Charger Receiver for 24T PLM-24 Lapel Microphone PW24-IM In Car Microphone D-Teg America, LLC 600 Morse Ave., Unit A 877-601-9918 info@d-teg.com www.d-teg.us...