Damage: Take care not to drop your BH|SPK parts and do not squeeze the pop- fi lter. JZ Microphones assumes no liability for any damage to any JZ Microphones product caused by the user.
Page 3
Put upper-right part of rubber band on the upper-right BH|SPK craddle`s metal pin and stretch lower-right rubber band until you can mount it on the lower-right BH|SPK craddle`s metal pin. Do the same with the left side and you are ready to apply fi rst attachment legg to BH|SPK craddle (see pictures) www.jzmic.com...
Page 4
3. Take your pop-fi lter and carefully put it on the attachment legs. Tighten the pop-fi lter screws shown in the picture. When it is done, take your BH series microphone and mount it on the craddle. Posi- tion the microphone`s head center to the pop-fi lter`s center and tighten the screw on the craddle to fi...
Page 5
BH|SPK Shock-mount and Pop-fi lter Kit Owners Manual All BH|SPK shock-mount and pop-fi lter kits come in a cartoon box. BH|SPK is compatible only with BH series microphones. BH|SPK can be used without the included pop-fi lter as a shock-mount.
Page 6
The pop fi lter made for BH series is very unique due to its special cone shape and special screen construc- tion. When applied, BH|SPK helps to reduce presence of various unwanted frequencies in the mix compared to standard pop fi...