Advertisement
Quick Links
KEN-503-0320K_INSTRUCTIONS_Layout 1 16/11/2012 14:48 Page 1
QUALITY GUARANTEE & WARRANTY
KENNEDY TOOLS carry a one year manufacturers warranty.
KENNEDY TOOLS are designed & manufactured
to the highest standards & specifications.
Assuring the quality and performance required by all sectors of industry.
KENNEDY TOOLS are fully guaranteed against
faulty materials & workmanship.
Should they be found to be defective, they will either be repaired or replaced
free of charge (fair wear and tear and/or misuse excepted).
Please retain supplier invoice as proof of purchase.
DECLARATION OF CONFORMITY
LOW VOLTAGE DIRECTIVE 2006/95/EC
EMC DIRECTIVE 2004/108/EC
We hereby certify that the KENNEDY AUTOMATIC BATTERY CHARGER - 12/6V - 4A
Harmonised Standards Applied: EN 60335-2-29: 2004 to be used in conjunction with
complies with all the relevant provisions of the EC Directive 2006/95/EC
EN 60335-1: 2002 + A11: 2004 + A1: 2004 + A12: 2006 + A2: 2006 + A13: 2008
and the EMC Directive 2004/108/EC
Harmonised Standards Applied: EN 55014-1: 2006, EN 55014-2: 1997/+ A2: 2001,
EN 61000-3-2: 2006, and EN 61000-3-3:1995/+A1:2001/+A2:2005.
KENNEDY TOOLS
Wigtston, Leicester, England, LE18 2FS.
Signed:
Name: Keith Read
Position: HSQE Group Manager
Whilst every effort has been made to ensure the accuracy of information contained in this instruction manual, the Kennedy Tools
policy of continuous improvement determines the right to change data, specifications and component parts without prior notice.
KENNEDY TOOLS
Wigston, Leicester, England, LE18 2FS.
Kennedy is a registered trade mark of The Kennedy Group Ltd.
Supplied by an ISO9001 approved company
© The Kennedy Group Ltd. 10/12
and EN 62233: 2008
Manufactured for
AUTOMATIC BATTERY CHARGER
- 12/6V 4A
MODEL KBC4A
KEN-503-0320K
l For WET batteries, AGM technology and GEL batteries
l Optimised charging programme
l Efficient 3 stage charge
l 100% rated output
l LED indicator: POWER/FULL/FAULT
l LEDs to indicate the battery level of charge
INSTRUCTION MANUAL
www.kennedy-tools.co.uk
l Portable and lightweight
l Intelligent circuit control and protection
Advertisement
Summary of Contents for Kennedy KBC4A
-
Page 1: Declaration Of Conformity
Portable and lightweight Whilst every effort has been made to ensure the accuracy of information contained in this instruction manual, the Kennedy Tools policy of continuous improvement determines the right to change data, specifications and component parts without prior notice. -
Page 2: Trouble Shooting
12A only. WARNING: Risk of explosive gas. l Use only attachments recommended or sold QUALITY KENNEDY AUTOMOTIVE PRODUCTS l Locate charger as far away from battery as by manufacturer. DC charger cables permit. AVAILABLE FROM YOUR DISTRIBUTOR l When disconnecting the battery charger, pull l NEVER charge a frozen battery. -
Page 3: Electrical Safety
Input ....220-240V 50hz 0.65A Model ......KBC4A Output . -
Page 4: Operating Instructions
KEN-503-0320K_INSTRUCTIONS_Layout 1 16/11/2012 14:48 Page 4 OPERATING INSTRUCTIONS CONNECTING TO BATTERIES OUT OF THE VEHICLE: BATTERY PREPARATION: Connect the crocodile clips to the battery in the following order: 1. Connect positive charging lead (red) to the positive post of the battery (marked P or +). 2.