Table of Contents Table of contents Operation and Care Grounding Instructions Warnings Maintenance of Machine Machine Specifications Wiring Instructions Parts list and Diagram Sprayer Hookup Instructions, Handle assembly Warranty Changing the speeds for your Trinity Page 2...
Operation and care Instruction For the Trinity OP machine. This floor machine is a high quality, precision made product. All parts used in the manufacturing of this machine have passed rigid quality control standards prior to assembly and an “each unit” final inspection prior to packaging is your assurance of proper assembly.
Remove or blow dust and dirt from the motor frequently. Machine Specifications Model Trinity OP 18” 3 Speed Voltage 115/240 V 60 hz Power Cord 12/3 50’...
TrH-1105 Trinity Handle Complete TrH-1106 50’ 12/3 blue/black cord TrH-1107 Push Button for spray TrH-1108 Round Rocker Switch Tr-1001 1 HP Motor Tr-1002 Rubber Bumper Brushes and heads for the trinity machine. Brush Head Grout and Tile Head Rug Beater Head Tr-1006 Black Phenoi Ball, For Rug Beater Tr-1007...
To operate sprayer, either pull up on the lever on the left or press down with your right thumb on the other end of the lever. To raise or lower handle, simply pull up on the handle on the right. Page 6...
(b). Return the product to the nearest Carpet Care Systems Int. repair location. Transportation charges to and from the repair location must be prepaid by the purchaser. (c).Carpet Care Systems Int. will repair the product and or replace any defective parts without charge within a reasonable time after receipt of the product.
Changing the speeds for your Trinity To attach your brush or any head, use the handy head tool with the allen tool to hold the center plug as you insert and tighten the two 3/8 bolts into your counterbalanc,Pic A. Put the head tool into one of the holes of the centerplug, Push in two bolts and start then by hand, then...