D-Link AirPremier N DAP-2590 Install Manual
Dual band poe access point
Hide thumbs
Also See for AirPremier N DAP-2590:
- User manual (90 pages) ,
- Quick installation manual (44 pages) ,
- Quick install manual (23 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for D-Link AirPremier N DAP-2590
Summary of Contents for D-Link AirPremier N DAP-2590
-
Page 2: Package Contents
Ethernet Cable Note: Using a power supply with a different voltage than the one included with the DAP-2590 will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller. -
Page 3: Hardware Overview
Hardware Overview LEDs 5 GHz - When lit, the access point is operating at 5GHz. This light will blink when there is wireless traffic. 2.4 GHz - When lit, the access point is operating at 2.4GHz. This light will blink when there is wireless traffic. LAN - Solid light when the Ethernet port is connected to a working port, such as a router or switch. -
Page 4: Installing The Hardware
Installing the Hardware Antennas Power Receptor LAN Port (PoE) Reset DAP-590 Install Guide... - Page 5 2. Connect one end of your Ethernet cable into the LAN (PoE) port on the DAP-2590 and the other end into one port on a PoE switch. To setup and manage the DAP-2590 from a computer, use one of the following methods: 1.
- Page 6 Mounting Plate Assembly Step 1: Insert provided wall anchors in the wall where the mounting plate will be attached. Step 2: Use the provided screws to secure the mounting plate on the wall. DAP-590 Install Guide...
- Page 7 Step 3: Attach the remaining screws securely to the back of the DAP-2590. Step 4: Attach the DAP-2590 to the mounting plate. DAP-590 Install Guide...
- Page 8 Step 5: Slide the DAP-2590 down into the grooves on the mounting plate to secure it to the plate. DAP-590 Install Guide...
- Page 9 Your Setup is Complete When you have completed the steps in this Installation Guide and configured your for your network, your network should look similar to this: * Maximum Wireless signal rate derived from IEEE 802.11n (draft 2.0) specifications. Actual data throughput will vary.
- Page 10 Notes DAP-590 Install Guide...
- Page 11 Notes DAP-590 Install Guide...
-
Page 12: Technical Support
Copyright ©2008 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link, the D-Link logo, and AirPremier are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.