Advertisement
Quick Links
Getting Started
1. Switch ON the main battery
a. Main battery switch is located on rear side of
yellow label battery door
b. Adjust DIP switch to "ON"
c. Place back the battery door
2.
Plugging the Power Cable
(Figure 2)
a.
Plug the AC power cord into the power
socket of the AC power adapter.
b.
Plug the other end of the AC power
cord to a live AC wall outlet.
c.
Plug the connector of the AC adapter
to the DC-IN port found at the left side
of the LYNX 10,4".
3.
Turning on the LYNX 10,4"
System (Figure 3)
To turn on the LYNX 10,4" System,
press the power button. The power
LED will light up to indicate that the
LYNX 10,4" System is on.
Main Packing List
Main system
Power Adapter
Corner Rubber
Accessories (Option)
Barcode Scanner
Vehicle Docking
Battery Charger
External Battery Pack
Exploring Your LYNX 10,4" System
Lynx 10,4" Quick Setup Guide v0.7
(Figure 1)
QTY
1
Stylus
1
Hand Strap
2
Shoulder Strap
QTY
1
MSR
1
GPS
1
Carrying Bag
1
QTY
1
Hand Screws
1
Corner Rubber Screw
1
Ethernet Cable
QTY
1
DeskTop Docking
1
Vehicle Power Adapter
1
Handle Secures
Figure 1
Figure 2
Figure 3
QTY
4
4
1
QTY
1
1
1
Advertisement
Related Manuals for Lynx Lynx LR6
Summary of Contents for Lynx Lynx LR6
-
Page 1: Getting Started
Lynx 10,4” Quick Setup Guide v0.7 Getting Started 1. Switch ON the main battery (Figure 1) a. Main battery switch is located on rear side of yellow label battery door b. Adjust DIP switch to “ON” c. Place back the battery door Figure 1 Plugging the Power Cable (Figure 2) -
Page 2: Attaching The Hand Strap
Installing Your Hand Strap or Shoulder Belt Tablet provides you an optional detachable hand strap and shoulder belt. You can use the hand strap or shoulder belt to carry the Tablet securely and safely when you are outside your home or office. Hand Strap Shoulder Belt Hand Screws... - Page 3 Installing External Battery Pack (Optional) Installing battery pack: For installing the battery pack, remove the cover of the external battery connector (step 1) and place it on the lower position (step 2). Then screw the battery frame at the rear side (step 3) for placing the battery pack (step 4). Please assure the battery pack is snapped into the external battery connector and external battery hook firmly (step 5).
- Page 4 Installing GPS Module: Before installing the GPS module, please adjust to DIP 2-3 for GPS mode as indicated in the following diagram. To install the GPS Module: 1. Make sure the system is turned off, internal battery detect DIP switch set to off and unplug AC adapter. 2.
Need help?
Do you have a question about the Lynx LR6 and is the answer not in the manual?
Questions and answers