Page 1
Temperature Controller ICY3727TC for ICY-Thermostat ICY3728TC for Universal Thermostat Installation Manual...
Page 2
Introduction The temperature controller is designed to connect a gas heater to a thermostat. Below shows in 7 short steps how that should be done. Installation Open the box and take out the bag of screws. Place the heater’s temperature gauge on the aluminum bracket. Cover it with insulation foil and close the clamps.
Page 3
Connect the power adapter to the round plug. (see figure below). Place the black sealing plate over the wires and close the box with the given screws. Place the temperature controller preferably upright with the cool- fins vertical. Turn heater knob on maximum. Make sure that the thermostat is not asking for heat.