Page 2
WARNING: FAILURE TO FOLLOW THIS GUIDE MAY RESULT IN SERIOUS INJURY! USING THIS MACHINE WITH RESPECT AND CAUTION WILL CONSIDERABLY REDUCE THE RISK OF PERSONAL INJURY. SAFETY GUIDE FOR THE EZ SHEAR FLR SERIES ™ 1 �����READ AND UNDERSTAND THIS INSTRUCTION MANUAL BEFORE OPERATING THE EZ SHEAR �...
SEt Up WELcOmE! YOUR EZ SHEAR FLR cOmES READY TO ASSEmbLE. *You will need #2 & #3 Phillips head screwdrivers Please Review and Verify Parts Included in Box: and a 1/2” (13mm) socket or wrench. 1. Power Assembly 1a. Safety Lock pin 2.
Page 4
• IMPORTANT • Avoid cross-threading by using your fingers to start all screws Start all screws By hAnD when assembling your shear. This will help avoid cross-threading. SEt Up 3. ATTAcH TAbLE Item E A. Attach front of table to base, using Item D screws.
Page 5
mAkInG cUTS Caution! Wear hand and eye protection while operating the EZ Shear™ Pull Safety Lock pin While gently pushing handle down, pull Safety Lock pin out, then lift handle. Place product on table. Bring Push the handle down handle down until blade until the material is touches material�...
If extreme pressure is required to cut AccESSORIES a product, it may result in damage to your machine. Please contact Bullet Tools before proceeding. Warranty is void if an unapproved product damages the machine. All Angle Fence Item #701AF...
This warranty does not cover any damage due to accident, misuse, abuse or negligence. Further, it is valid only if the product is used with the cut products specified in the cut guide. Please refer to the User Guide for details or call Bullet Tools™...