Driver Installation - Crystal CS4280 User Manual

JP 1 Jumper for MIC compatibility
To suit the compatibility requirements of various types of microphone in the market, we have
added in a jumper setting at location 'JP 1' to make it more user-friendly for end-user. The
default jumper is 'OPEN' which is good for the most common type of microphone in the
market. However, should you experience problems working with your microphone, then
please change the jumper setting to 'CLOSE'
4.

DRIVER INSTALLATION

4.1 Installation in Windows 95 / 98
After the Crystal PCI Sound Card is securely inserted into an available PCI slot, you
can install Crystal PCI Audio 's drivers and utilities.
Note: Before installing the Crystal PCI Sound Card, you must delete all other sound
card drivers by using their uninstall program. If they do not have their own
uninstall program, then you must delete the driver in Device Manager. Which is
located in the System option under Control Panel.
1. Power on the system.
2. During the load process, Windows 9X should detect Crystal PCI Sound Card and
display a message such as "New Hardware Found". If Windows prompts you for
the drivers of the "PCI Multimedia Audio Device", please inset the Driver CD
into CD-ROM drive.
3. Enter the driver's location: "D:\CS4280\WIN9X\" and click "Next".
4. The driver installer will guide you through the driver installation process.
4.2 Windows NT 4.0 Driver Installation
Note : Install the Sound Card onto the motherboard only after the Windows NT 4.0 operating
system software has been installed correctly to your system.
1. Install the Crystal PCI Sound Card on the motherboard, and power on the system.
2. Hit "start" , select "Setting" → "Control Panel" → "Multimedia" → "Devices",
3. then the "Devices" dialog box will appear.
4. Hit "Add" button , then select "OK " , the "Install Driver " dialog box will appear.
5. Insert the Driver CD into CD-ROM drive D:
6. Type "D:\CS4280\NT40" , click "OK" .
7. Click "OK" button in the "Add Unlisted or Updated Driver" , wait for "Restart"
requirement.
8. Restart the computer.
5. TROUBLESHOOTING
PCI Audio Accelerator
3
User's Guide