NO:VSP24W-25L 2.4GHzWireless Mobile AV receiver MPEG-4 Recorder User Manual...
Page 2
Caution This product is controlled by microprocessor; improper use may cause the machine stop operating. Please stop and restart the machine If battery is not fully charged, this may cause serious system error when recording and transferring video files Do not open the cover! It may cause electrical shock。...
Safety Notice Internal rechargeable battery λ Do not use damaged battery or charger λ Do not charge battery over the specified time period λ First use or the battery has not been used for past several month, please recharge the battery before use.
Page 4
Product Packages ★ Any changes of the above items in the packages will not inform in advance. Please recycle and re-use above item as far as possible。...
Page 6
Connect to AC socket (Charge battery purpose) Before use this product, please use the provided DC adapter for charging purpose. Please connect DC adapter plug into DC 5V socket Please firmly plug in the DC into the AC socket The battery life indicator will turn to Red when it is charging The light will turn to green when is fully charged.
Mode selection Press to power on Wireless receiving mode ■Use wireless receiving mode to receive video signal 1. Push receiving mode key to R (Wireless receiver)Mode, Receiver screen will display Wireless video recorder, Press Key. Select your desired channel CH1: 2414MHz; CH2: 2432MHz; CH3: 2450MHz; CH4: 2468MHz. 2.
Page 8
Select use mode Multimedia player mode ■Use multimedia player file 1. Turn the receiver mode to “P” mode, the machine will display the the Main menu of the Multimedia mode. Enter into the multimedia explorer, there are four file folders (MP3,VIDEO,DCIM,PHOTO) 2.
Connect to external equipment Use AV Cord to connect to external equipment ■ check video/audio/voice through TV 1. Connect AV connector to AV OUT plug of the product, connect 3RCAplug connect to TV set(Yellow: Video; White: Audio(L); Red : Audio (R) 2.
Page 10
Connect to external equipment Use USB connect to external USB equipment ■ This product support OTG function, it can link with U disk or removable hard disk for accessing and storage. ■ Delect and Copy function: If SD card is inserted, System will set default to SD card, if no SD card is or insert the SD card after the product is power on, the default memory card need to set in the memory.
Page 11
Connect to external equipment Connect USB connect to your PC ■open the bottom cover of the receiver,use USB cord to connect with the precut using USB 2.0 interface. If no correct procedure, please do not disconnect the USB cord. This will prevent risks of data lost syste m or receiver.
Function setting ■ Turn the receiver mode to P (Multimedia player)Mode, Main menu will appear. 1.Press to select Setup function , Press Key to confirm to display following sub-menu: Time & date setting, press voice setting,language setting, memory setting,Display,Logo,contrast setting, default setting, system upgrade, auto shut down and format.
Page 13
6.Press +/– to Brightness sub-menu,Press to enter, press to change contrast, use confirm and exit. 7.press +/– to shift to Format sub-menu, Press to enter,three options available:Storage, Main memory Disk 盤(Nand Flash, MSDC, U Disk).Use +/–use, to selec desired option. Select Yes or No for each option.
Page 14
nquiry Inquiry can check information e.g. [Storage capacity [memory card capacity] [U disk Capacity] [version] 1.Turn the receive mode to P (multimedia receiver)mode, enter inquiry menu,press+/– to select you desired information. Press to enter. 項目 解釋 Storage capacity Display the used and free capacity of the receiver/player Display used and free capacity of SD card (Only when you insert a SD Main memory card.
Need help?
Do you have a question about the VSP24W-25L and is the answer not in the manual?
Questions and answers