Table of Contents
Advertisement
8 .Operating Ca me r a
SPECIAL Sub-Menu : MOTION DETECT
When there is a movement in the monitoring area, there will be an alarm, or
the user will be informed through communications or " MD " will display on the
screen.
1. ZONE NAME
• Select the motion detection area number.
• Use the mask displayed on the screen to set positions.
• Can be selected WINDOW0~3 or BLOCK.
2. CONTROL
• Select enables or disables the motion detection feature.
3. H START
• Set the horizontal starting point for motion detection area.
• Select desired position from 11 to 178 in WINDOW0~3.
• Select desired position from 0 to 11 in BLOCK.
4. H END
• Set the horizontal terminating point for motion detection area.
• Select desired position from 11 to 178 in WINDOW0~3.
• Select desired position from 0 to 11 in BLOCK.
5. V START
• Set the vertical starting point for motion detection area.
• Select desired position from 6 to 128 in WINDOW0~3.
• Select desired position from 0 to 7 in BLOCK.
MOTION DETECT
ZONE NAME
... WINDOW0
CONTROL
... ON
H START
... 16
H END
... 88
V START
... 9
V END
... 65
SENSITIVITY
... 8
ALARM
... OSD&SERIAL
INITIAL
RETURN
3 6
Advertisement
Table of Contents
