Table of Contents
Advertisement
8 .Operating Ca me r a
3. Select the desired feature using the TELE and WIDE button.
• The indicator moves up and down in the main menu feature.
• Move the arrow indicator to the desired feature.
4. Change the status of the selected feature using the NEAR and FAR
button
• Pressing the NEAR/FAR button, the sub-menu is displayed.
• Press the TELE/WIDE button to move up and down the sub-menu.
category and set each category by pressing the NEAR/FAR button.
• When completed, move the arrow indicator to "RETURN" and press the
NEAR/FAR button.
5. Press the MENU button at the main-menu or sub-menu screen to hide the
menu.
• It does not apply when the MENU button is used for other uses.
6. FACTORY DEFAULT
• All menu will be initialized except for the Camera ID
SETUP
1.LENS
2.EXPOSURE
3.WHITE BALANCE
4.WDR/BLC
5.DAY&NIGH
6.IMAGE
7.SPECIAL
8.FACTORY DEFAULT
9.EXIT
LENS
FOCUS MODE
FOCUS LIMIT
ZOOM START
ZOOM STOP
ZOOM SPEED
E-ZOOM
INITIAL
RETURN
2 1
[┛]
[┛]
[┛]
[┛]
[┛]
[┛]
[┛]
... AUTO
... 50CM
... X1
... X360
... V-FAST
... ON
Advertisement
Table of Contents
