Table of Contents
Advertisement
Heater Insulation Kit
Sta-Rite Pool/Spa Group
293 Wright Street, Delavan, WI 53115
North America: 800-752-0183, FAX 800-582-2217
International: 262-728-5551, FAX: 262-728-4461, TELEX: ITT 4970245
www.sta-ritepool.com
Union City, TN • Delavan, WI • Mississauga, Ont. • Murrieta, CA
S430 (Rev. 2/14/03)
© 2003, Sta-Rite Industries, Inc.
Printed in U.S.A.
Advertisement
Table of Contents
Related Manuals for STA-RITE SR
Summary of Contents for STA-RITE SR
- Page 1 293 Wright Street, Delavan, WI 53115 North America: 800-752-0183, FAX 800-582-2217 International: 262-728-5551, FAX: 262-728-4461, TELEX: ITT 4970245 www.sta-ritepool.com Union City, TN • Delavan, WI • Mississauga, Ont. • Murrieta, CA S430 (Rev. 2/14/03) © 2003, Sta-Rite Industries, Inc. Printed in U.S.A.
-
Page 2: Tools/Parts Required
Servicing Procedure (See Figure 1): Heavy parts; can cause personal injury. When lifting, use all proper precautions for the weights involved. 1/2" Insulation Combination Gas Control Valve OFF Blanket Turn Clockwise and press down 1" Insulation to turn off gas. Manual/Gas Valve OFF Power Flameholder Insulation... - Page 3 Combustion Chamber. Combustion Chamber. 17. Wrap a shop rag around each hanger, one at a time (be NOTICE: Model SR/SRC200 heaters built before 1/1/98 careful; it’s sharp) and hammer down on the Lower require two 1/2” Insulation Blankets.
- Page 4 • Insert and start the two short bolts until they engage three or four threads, then tighten all bolts according to the normal torque pattern shown on Page 5. • SR/SRC333: These models use long bolts only. Tighten all bolts HAND TIGHT; then tighten according to the 4076 1001 normal torque pattern shown on Page 5.
- Page 5 29. Tighten the bolts to the torque spec as shown in Figure 7. 33. Reinstall the Combustion Chamber top and fasten with nuts on studs from Combustion Chamber body. Torque Pattern - All Models 34. Reinstall the Combustion Chamber in the Lower Enclosure and fasten with hold-down nuts.
- Page 6 Junction-box in Flexible Conduit Figure 10: Junction Box Wiring Connections For detailed installation, operation, maintenace and safety information about the Sta-Rite pool heater, call customer service at 1-800-752-0183 and request a Sta-Rite Pool/Spa Heater Training and Service manual, publication S5066.
-
Page 7: Connection Diagram
CONNECTION DIAGRAM AGS Switch Air Flow Switch Y/BL Stack Flue Sensor Extra Switch 1 Gas Valve Hi-Limit Switch Pressure Switch OPERATING CONTROL MEMBRANE PAD CONNECTION JMP3 VERSION 1 PAD CONTROL CENTER SPA CONTROL External Control Interface Circuit Disabled, Heater Membrane Pad Spa Line Common Line Enabled... -
Page 8: Repair Parts List
REPAIR PARTS LIST Part Part Description Qty. Flameholder Insulation Cap 42001-0075 1/2” Blanket 42001-0071 1” Top Insulation 42001-0070 Condensate Evaporator 42001-0065 1” “M” Insulation 42001-0072 1/2” Blanket* 42001-0073 * Model SR/SRC200 heaters built before 1/1/98 use 2 of Part No. 42001-0073.