Wireless usb pc to tv audio/video adapter (37 pages)
Summary of Contents for Warpia StreamHD
Page 1
Rev B 1. SOFTWARE INSTALLATION: Prior to installing the Warpia StreamHD software it is important to make sure there is no prior installation of Wireless USB or Display Link software from Warpia or other companies. IF YOU HAVE THIS SOFTWARE IN YOUR SYSTEM, THIS WILL...
Page 2
2. HARDWARE INSTALLATION: After the software has been installed, insert PC Adapter into an available USB port. Plug the Receiver Base into an electrical outlet using the power cord provided. Connect the Receiver Base to the TV/Monitor/Projector using an HDMI or VGA cable with the appropriate sound cable when required.
Page 3
4. CONFIGURING VIDEO SETTINGS: You can choose to set the StreamHD’s video output to either Extend mode or Mirror mode. The default setting on most operating systems is Extend mode. Extend mode extends your desktop space across multiple monitors.
Page 4
5. CONFIGURING AUDIO SETTINGS: The PC should automatically connect via the StreamHD to the Wireless audio device. If it does not, or if you would like to switch audio devices, you can select the Audio Playback device from the drop down dialog in Windows 7 as follows: ®...