Sony ZS-M35 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Media Player
  5. MINIDISC ZS-M35
  6. Service manual
Sony ZS-M35 Service Manual

Sony ZS-M35 Service Manual

Personal minidisc system
Hide thumbs Also See for ZS-M35:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual
SERVICE MANUAL
Ver 1.2 2001.07
U.S. and foreign patents licensed from Dolby Laboratories
Licensing Corporation.
AUDIO POWER SPECIFICATIONS (US model)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION
With 4-ohm loads, both channels driven from
150 - 10,000 Hz; rated 4 W per channel-
minimum RMS power, with no more than 10%
total harmonic distortion in AC operation.
CD player section
System
Compact disc digital audio system
Laser diode properties
Material: GaAlAs
Wave length: 785 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of
about 200 mm from the objective lens surface on
the optical pick-up block with 7 mm aperture.)
Spindle speed
200 r/min (rpm) to 500 r/min (rpm) (CLV)
Number of programme positions
2
Frequency response
20 - 20,000 Hz +1/–2 dB
Wow and flutter
Below measurable limit
Radio section
Frequency range
FM: 87.5 - 108 MHz
AM: 530 - 1,710 kHz
Antennas
FM: Telescopic antenna
AM: AM loop antenna
Sony Corporation
9-927-183-33
2001G0400-1
Personal Audio Company
© 2001.7
Shinagawa Tec Service Manual Production Group
Model Name Using Similar Mechanism
CD
CD Mechanism Type
Section
Optical Pick-up Name
Model Name Using Similar Mechanism
MD
MD Mechanism Type
Section
Base Unit Name
Optical Pick-up Name
SPECIFICATIONS
MD player section
System
Minidisc digital audio system
Disc
MiniDisc
Laser diode properties
Material: GaAlAs
Wave length: 785 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of
about 200 mm from the objective lens surface on
the optical pick-up block with 7 mm aperture.)
Recording/playback time
Stereo recording:
Maximum 80 minutes (with MDW-80)
Monaural recording:
Maximum 160 minutes (with MDW-80)
Revolutions
400 rpm to 900 rpm (CLV)
Error correction
Advanced Cross Interleave Reed Solomon Code
(ACIRC)
Sampling frequency
44.1 kHz
PERSONAL MINIDISC SYSTEM
– 1 –
ZS-M35
US Model
Canadian Model
Taiwan Model
KSM-213CDM
– Continued on next page –
PMC-20
KSS-213C
PMC-MD55
MDM-5GA
MBU-5A
KMS-260B

Advertisement

Table of Contents
loading

Related Manuals for Sony ZS-M35

Summary of Contents for Sony ZS-M35

  • Page 1 ZS-M35 SERVICE MANUAL US Model Canadian Model Ver 1.2 2001.07 Taiwan Model Model Name Using Similar Mechanism PMC-20 U.S. and foreign patents licensed from Dolby Laboratories Licensing Corporation. CD Mechanism Type KSM-213CDM Section Optical Pick-up Name KSS-213C AUDIO POWER SPECIFICATIONS (US model)
  • Page 2 LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY. – 2 –...

  • Page 3: Table Of Contents

    TABLE OF CONTENTS 1. SERVICING NOTES 6. DIAGRAMS 1-1. Notes on Handling the Optical Pick-up Block or Base Unit .. 4 6-1. IC Pin Function Descriptions ..........33 1-2. Notes on Laser Diode Emission Check ....... 4 6-2. Circuit Boards Location ............ 42 1-3.

  • Page 4: Servicing Notes

    SECTION 1 SERVICING NOTES This Compact Disc player 1-5. CHUCK PLATE JIG ON REPAIRING is classified as a CLASS 1 On repairing CD section, playing a disc without the CD lid, use LASER product. Chuck Plate Jig. The CLASS 1 LASER •...

  • Page 5: Jig For Checking Bd Board Waveform

    1-8. JIG FOR CHECKING BD BOARD WAVEFORM The special jig (J-2501-149-A) is useful for checking the waveform of the BD board. The names of terminals and the checking items to be performed are shown as follows. GND : Ground I+3V : For measuring IOP (Check the deterioration of the optical pick-up laser) IOP : For measuring IOP (Check the deterioration of the optical pick-up laser) TEO : TRK error signal (Traverse adjustment) VC : Reference level for checking the signal...

  • Page 6: Checks Prior To Parts Replacement And Adjustments

    1-9. CHECKS PRIOR TO PARTS REPLACEMENT AND ADJUSTMENTS (FOR MD SECTION) Before performing repairs, perform the following checks to determine the faulty locations up to a certain extent. Details of the procedures are described in “5 Electrical Adjustments”. Criteria for Determination Measure if unsatisfactory: (Unsatisfactory if specified value is not satisfied) Laser power check...

  • Page 7: General

    SECTION 2 GENERAL This section is extracted from instruction manual. Basic Operations Playing a CD Use these buttons for additional operations . , > CD u CD x 1, 2 Z PUSH OPEN/CLOSE VOLUME –, + POWER Press Next time you want to listen to a CD, just press adjust the volume VOLUME +, –...

  • Page 8: Playing An Md

    Playing an MD Use these buttons for additional operations MD u ., > MD x VOLUME –, + POWER Press Next time you want to adjust the volume VOLUME +, – listen to a MD, just press For hookup instructions, see pages 57 - 59. MD u.

  • Page 9: Disassembly

    SECTION 3 DISASSEMBLY Note : This set can be disassemble according to the following sequence. Cabinet (Rear) Cabinet (Upper) Assy FL Board Main CD Mechanism Assy Board Board Block Power Board Top Board MD Block Assy Tuner Board Jack Board DG Board LED Board Key Board...

  • Page 10: Cabinet (Upper) Assy

    3-3. CABINET (UPPER) ASSY qacabinet (upper) assy 2 CN705 3 CN404 4 connector 9 CN406 q; CN409 1 BVTP 3x10 7 CN303 8 CN407 5 CN301 6 CN408 3-4. MD BLOCK ASSY 3 MD block assy 2 BVTP 3x14 1 CN2 –...

  • Page 11: Tuner Board

    3-5. TUNER BOARD 1 BVTP 3x10 chassis (TU) 4 BVTP 3x10 2 BVTP 3x10 5 TUNER board 3 BVTP 3x10 3-6. JACK BOARD 1 BVTP 2.6x8 3 JACK board 2 CN306 – 11 –...

  • Page 12: Led Board

    3-7. LED BOARD 1 BVTP 2.6x8 2 BVTP 2.6x8 3 LED board 3-8. KEY BOARD 1 BVTP 2.6x8 2 BVTP 2.6x8 3 KEY board – 12 –...

  • Page 13: Top Board

    3-9. TOP BOARD 1 BVTP 2.6x8 5 TOP board 4 button (top) 3 BVTP 2.6x8 3-10. FL BOARD 1 CN405 3 FL board 2 BVTP 3x10 – 13 –...

  • Page 14: Main Board

    3-11. MAIN BOARD 5 BVTP 3x10 1 CN410 4 BVTP 3x10 6 BVTP 3x10 8 MAIN board 7 CN403 2 CN707 3 CN704 CD board 3-12. CD BOARD 2 BVTP 3x10 1 CN801 3 BVTP 3x10 4 CN701 5 CD board –...

  • Page 15: Cd Mechanism Block

    3-13. CD MECHANISM BLOCK 1 PWH 2.6x10 2 PWH 2.6x10 4 CD mechanism block 3-14. DG BOARD 1 P 2.6x5 2 plate (lower) , shield 5 CN605 6 CN603 4 P 2.6x5 3 P 2.6x5 q; DG board 8 CN602 9 CN601 claws –...

  • Page 16: Plate (Front), Shield

    3-15. PLATE (FRONT), SHIELD 3 plate (front), shield 2 P 2.6x5 1 P 2.6x5 3-16. MD MECHANISM BLOCK-1 (MDM-5GA) 3 claws 5 plate (upper), shield 4 claws 6 BVTTWH M3 7 BVTTWH M3 9 MD mechanism block (MDM-5GA) 8 harnes 1 P 2.6x5 2 P 2.6x5 –...

  • Page 17: Md Mechanism Block-2 (Slider (Cam) Assy)

    3-17. MD MECHANISM BLOCK-2 (SLIDER (CAM) ASSY) 6 slider (cam) assy 3 bracket (guide L) 1 BV 2.6 (1T3B) 2 spring, leaf 4 BV 2.6 (1T3B) 5 bracket (guide R) horizontal When assembling, set the press fitting shaft of the cam gear horizontal to the lever (head).

  • Page 18: Md Mechanism Block-3 (Bd Board)

    3-18. MD MECHANISM BLOCK-3 (BD BOARD) 2 MD base unit BD board (side A) 5 CN104 6 CN101 1 BV 2.6 (1T3B) 3 Removal the solders 7 BD board 4 M 1.7 3-19. MD MECHANISM BLOCK-4 (SW BOARD) 1 PTPWH M 2.6x6 2 gear (B) 3 PWH 1.7x4 4 motor assy, loading...

  • Page 19: Test Mode

    SECTION 4 TEST MODE Refer to “5. ELECTRICAL ADJUSTMENT” for the test mode of CD section. 4-1. MD SECTION 1. PRECAUTIONS FOR USE OF TEST MODE • As loading related operations will be performed regardless of the test mode operations being performed, be sure to check that the disc is stopped before setting and removing it.
  • Page 20 5-1. Operating the Continuous Playback Mode 1. Entering the continuous playback mode (1) Set the disc in the unit. (Whichever recordable discs or discs for playback only are available) (2) Press the u (MD) or x (MD) button to display “CPLAY MODE”. [RADIO/BAND] (3) Press the button to change the display to “CPLAY MID”.
  • Page 21 6. FUNCTIONS OF OTHER BUTTONS Function Contents Sets continuous playback when pressed in the STOP state. When pressed during continuous playback, u (MD) and EDIT the tracking servo turns ON/OFF. x (MD) and EDIT Stops continuous playback and continuous recording. >...

  • Page 22: Electrical Adjustments

    SECTION 5 ELECTRICAL ADJUSTMENTS 5-1. TUNER SECTION 0 dB = 1 µV FM FREQUENCY COVERAGE ADJUSTMENT • FM Section Setting: Frequency Display 87.5 MHz 108 MHz BAND button: FM + 0.4 V + 0.3 V Reading on Digital voltmeter FM RF signal –...
  • Page 23 Adjustment Location: (COMPONENT SIDE) AM IF ADJUSTMENT FM FREQUENCY COVERAGE ADJUSTMENT TRACKING ADJUSTMENT AM FREQUENCY COVERAGE ADJUSTMENT TRACKING ADJUSTMENT TP(VT) – 23 –...

  • Page 24: Md Section

    5-2. MD SECTION 1. PARTS REPLACEMENT AND ADJUSTMENT • Check and adjust the mechanism deck as follows. The procedure changes according to the part replaced. • Abbreviation : Optical pick-up OWH : Overwrite head • Laser power check • Focus bias check •...
  • Page 25 2. PRECAUTIONS FOR CHECKING LASER DIODE 4. Use the following tools and measuring device. • Check Disc (MD) TDYS-1 EMISSION (Part No. 4-963-646-01) To check the emission of the laser diode during adjustments, never • Test Disc (MDW-74/AU-1) (Part No. 8-892-341-41) view directly from the top as this may lose your eye-sight.
  • Page 26 6. CHECK PRIOR TO REPAIRS 6-2. Focus Bias Check Change the focus bias and check the focus tolerance amount. These checks are performed before replacing parts according to Checking Procedure: “approximate specifications” to determine the faulty locations. For 1. Load the test disc (MDW-74/AU-1). details, refer to “Checks Prior to Parts Replacement and Adjust- 2.

  • Page 27: Laser Power Adjustment

    7. TEMPERATURE COMPENSATION OFFSET 7. Then, press the u (MD) or x (MD) to display “LDPWR CHECK”. ADJUSTMENT 8. Press the [RADIO/BAND] button once to display “LD 0.9mW $ Save the temperature data at that time in the non-volatile memory ”.
  • Page 28 9. EF BALANCE ADJUSTMENT 8. Press the u (MD) or x (MD) button so that the waveform of the oscilloscope becomes the specified value. (When the JOG dial is turned, the of “EFB- ” changes and Note 1: Data will be erased during MO reading if a recorded disc is used in this adjustment.
  • Page 29 17. Press the [RADIO/BAND] button, display “EFB = 11. ERROR RATE CHECK SAVE” for a moment and save the adjustment results in the non-volatile memory. 11-1. CD Error Rate Check Next “EFBAL ADJUST” will be displayed. Checking Procedure: 18. Press the Z (MD) button and take out the disc. 1.
  • Page 30 Adjustment Location: – BD BOARD (COMPONENT SIDE) – CN101 D101 CN110 I+3V NOTE IC171 – BD BOARD (CONDUCTOR SIDE) – IC101 IC121 IC192 Note: It is useful to use the jig for checking the waveform. (Refer to Ser- vicing Notes on page 5) –...

  • Page 31: Cd Section

    5-3. CD SECTION Display Set the CD test mode when performing confirmations. After completing the confirmation, release the CD test mode. XX XXX In the CD test mode, the set works as following sequence. CD test mode sequence: 1. Enter the CD test mode 2.
  • Page 32 4. ALL SERVO ON Mode 1 6. Releasing the CD Test Mode (RF Level and Jitter Confirmation 1) 1. Press the x (CD) button to stop rotate the disc. 2. Press the [POWER] button to release the CD test mode and turn 1.

  • Page 33: Diagrams

    SECTION 6 DIAGRAMS 6-1. IC PIN FUNCTION DESCRIPTIONS • BD BOARD IC101 CXA2523AR (RF AMP, FOCUS/TRACKING ERROR AMP) Pin No. Pin Name Pin Description I-V converted RF signal I input from the optical pick-up block detector I-V converted RF signal J input from the optical pick-up block detector Middle point voltage (+ 1.65 V) generation output terminal 4 –...
  • Page 34 • BD BOARD IC121 CXD2654R (DIGITAL SIGNAL PROCESSOR, DIGITAL SERVO SIGNAL PROCESSOR, EFM/ACIRC ENCODER/DECODER, SHOCK PROOF MEMORY CONTROLLER, ATRAC ENCODER/DECODER) Pin No. Pin Name Pin Description Focus OK signal output to the MD mechanism controller (IC601) MNT0 (FOK) “H” is output when focus is on (“L”: NG) MNT1 (SHOCK) Track jump detection signal output to the MD mechanism controller (IC601) MNT2 (XBUSY)
  • Page 35 Pin No. Pin Name Pin Description XRAS Row address strobe signal output to the D-RAM (IC124) “L” active Write enable signal output to the D-RAM (IC124) “L” active Two-way data bus with the D-RAM (IC124) MVCI I (S) Digital in PLL oscillation input from the external VCO Not used (fixed at “L”) ASYO Playback EFM full-swing output terminal...
  • Page 36 Pin No. Pin Name Pin Description SRDR Sled servo drive PWM signal (–) output to the BH6511FS (IC152) SFDR Sled servo drive PWM signal (+) output to the BH6511FS (IC152) SPRD Spindle servo drive PWM signal (–) output to the BH6511FS (IC152) SPFD Spindle servo drive PWM signal (+) output to the BH6511FS (IC152) FGIN...
  • Page 37 • MAIN BOARD IC401 CXP740096-044Q (SYSTEM CONTROL) Pin No. Pin Name Pin Description — Not used MEGA BASS MEGA BASS on/off control signal output “L”: MEGA BASS on LINE-LEVEL Line in level control signal output “L”: normal, “H”: high AU-CS Chip select signal output to the electrical volume (IC301) AU-DATA Serial data output to the electrical volume (IC301)
  • Page 38 Pin No. Pin Name Pin Description KEY-C4A Key input terminal AVSS — Ground terminal (for A/D converter) AVREF — Reference voltage (+3.3V) input terminal (for A/D converter) AVDD — Power supply terminal (+3.3V) (for A/D converter) 55 – 58 KEY C3A – C0A Key input terminal 3.3V-SHORT AU 7.5V short test pin...
  • Page 39 • DG BOARD IC601 RU8X13MF-0102 (MD MECHANISM CONTROLLER) Pin No. Pin Name Pin Description 1, 2 DAOUT0, DAOUT1 Not used (open) 3 – 5 KEY0 – KEY2 Key input terminal (A/D input) Not used (fixed at “H”) Detection input from the disc chucking-in detect switch “L: chucking CHACK-IN Not used (fixed at “H”)
  • Page 40 Pin No. Pin Name Pin Description +3.3V — Power supply terminal (+3.3V) SNG/CHG — Not used (fixed at “L”) 50, 51 JOG1, JOG0 JOG dial pulse input Not used (fixed at “L”) Two-way data bus with the EEPROM (IC171) Clock signal output to the EEPROM (IC171) Select whether D-RAM capacitance 2M bit or 4M bit “L”: 4M bit (external D-RAM), “H”: 2M/4M...
  • Page 41 Pin No. Pin Name Pin Description REC/PB Not used (open) — Not used (open) Recording data output enable signal output to the CXD2654R (IC121) and overwrite head SCTX driver (IC181) Writing data transmission timing output (Also serves as the magnetic head on/off output) XLATCH Serial data latch pules signal output to the CXD2654R (IC121)

  • Page 42: Circuit Boards Location

    6-2. CIRCUIT BOARDS LOCATION POWER board LED board TOP board SW board BATTERY (+) board BATTERY (–) board KEY board BD board DG board CD board CD MOTOR board MAIN board FL board TUNER board JACK board – 42 –...

  • Page 43: Block Diagram -Tuner Section

    ZS-M35 6-3. BLOCK DIAGRAM — TUNER SECTION — TUNER BOARD IF, DET, FM MPX IC1 (2/2) CT1,L1 FM/AM FRONT-END ANT1 IC1 (1/2) TRACKING L-OUT RA-LCH DIVIDE DET-OUT MPX-IN FM RF-IN MIX-OUT IF-IN AM/FM B.P.F DECODE MUTE BUFFER R-OUT R-CH FM RF OUT...

  • Page 44: Block Diagram -Md Section

    ZS-M35 6-4. BLOCK DIAGRAM — MD SECTION — CN102 CN601 DG BOARD BD BOARD (1/2) CN603 LEVEL SHIFT D-IN CN104 IC604 OVER WRITE EFMO ADDT D/A, A/D +3.3V HEAD DRIVE MD B+ CONVERTER SECTION IC181, Q181, 182 (+3.3V) (+5V) FILI...

  • Page 45: Block Diagram -Cd Section

    ZS-M35 6-5. BLOCK DIAGRAM — CD SECTION — CD BOARD RF AMP, FOCUS/TRACKING SERVO CN705 IC701 DOUT OPTICAL PICK-UP D-OUT SECTION BLOCK DIGITAL SIGNAL PROCESSOR, (Page 48) RF H CN701 CLV SERVO, D/A CONVERTER (KSS-213C) IC702 CN702 RF AMP MAIN...

  • Page 46: Block Diagram -Audio Section

    ZS-M35 6-6. BLOCK DIAGRAM — AUDIO SECTION — R-CH : Same as L-CH. JACK BOARD (2/2) MAIN BOARD (3/3) • SIGNAL PATH : FM CN403(2/2) ELECTRONIC VOLUME POWER AMP : CD PLAY IC302 IC301 CN301 CN304 CD LCH : MD PLAY...

  • Page 47: Schematic Diagram -Cd Section (1/2)

    ZS-M35 6-7. SCHEMATIC DIAGRAM — CD SECTION (1/2) — • Refer to page 95 for IC Block Diagrams. (Page 55) Common Note on Printed Wiring Boards: Common Note on Schematic Diagram: • X : parts extracted from the component side.

  • Page 48: Schematic Diagram -Cd Section (2/2)

    ZS-M35 6-8. SCHEMATIC DIAGRAM — CD SECTION (2/2) — • Refer to page 96 for IC Block Diagrams. • Refer to page 54 for Note. TP(RFO) (Page 79) TP(TEO) (Page 82) TP(VC) (Page 72) (Page 82) (Page 53) Note: Note: The components identi- Les composants identifiés par...
  • Page 49 ZS-M35 6-9. PRINTED WIRING BOARDS — CD SECTION — • Refer to page 53 for Note. (Page 76) (Page 76) (Page 73) (Page 76) CD MOTOR BOARD M802 (SLED) S801 (LIMIT) TP(VC) TP(TEO) M801 TP(RFO) (SPINDLE) (22) 1-675-844- (21) • Semiconductor Location Ref.
  • Page 50 ZS-M35 6-10. PRINTED WIRING BOARDS — TUNER SECTION — • Refer to page 53 for Note. • Semiconductor Location Ref. No. Location (Page 75) TP(VT) – 59 – – 60 –...

  • Page 51: Schematic Diagrams -Tuner Section

    ZS-M35 6-11. SCHEMATIC DIAGRAMS — TUNER SECTION — • Refer to page 95 for IC Block Diagrams. • Refer to page 54 for Note. (Page 82) • Voltage is dc with respect to ground under no-signal (detuned) condition. no mark : FM ) : AM –...
  • Page 52 ZS-M35 6-12. PRINTED WIRING BOARDS — BD SECTION — • Refer to page 53 for Note. DG BOARD DG BOARD CN601 CN602 (Page 73) (Page 73) DG BOARD (REC POSITION) CN605 (LOADING) (Page 73) • Semiconductor Location Ref. No. Location Ref.

  • Page 53: Schematic Diagram -Bd Section (1/2)

    ZS-M35 6-13. SCHEMATIC DIAGRAM — BD SECTION (1/2) — • Refer to page 98 for IC Block Diagrams. • Refer to page 54 for Note. Note: Note: The components identi- Les composants identifiés par fied by mark 0 or dotted...

  • Page 54: Schematic Diagrams -Bd Section (2/2)

    ZS-M35 6-14. SCHEMATIC DIAGRAMS — BD SECTION (2/2) — • Refer to page 98 for IC Block Diagrams. • Refer to page 54 for Note. (Page 66) • Waveforms (BD BOARD) 570mVp-p 200mV/div, 500ns/div IC101 (I, J) (MD PLAY) Approx.

  • Page 55: Schematic Diagram -Dg Section

    ZS-M35 6-15. SCHEMATIC DIAGRAM — DG SECTION (1/2) — • Refer to page 99 for IC Block Diagrams. • Refer to page 54 for Note. • Waveforms (DG BOARD) 2.0Vp-p 1V/div, 50ns/div IC601 (XIN) 12MHz 1.9Vp-p (Page 500mV/div, 10µs/div IC601 (XIN-T) 32.8MHz...
  • Page 56 ZS-M35 6-16. SCHEMATIC DIAGRAM — DG SECTION (2/2) — • Refer to page 100 for IC Block Diagrams. • Refer to page 54 for Note. (Page 70) (Page 79) (Page 56) • Voltage is dc with respect to ground under no-signal (detuned) condition.

  • Page 57: Printed Wiring Board -Dg Section

    ZS-M35 6-17. PRINTED WIRING BOARD — DG SECTION — • Refer to page 53 for Note. (Page 76) MAIN BOARD CN404 • Semiconductor DG BOARD SIDE A DG BOARD SIDE B Location Ref. No. Location D602 D603 IC601 IC602 IC603...

  • Page 58: Printed Wiring Board -Main Section

    ZS-M35 6-18. PRINTED WIRING BOARD — MAIN SECTION — • Refer to page 53 for Note. CD BOARD (Page 57) CD BOARD (Page 57) CN704 CN707 MAIN BOARD JACK BOARD CN304 (Page 84) MD SHIELD BOX POWER BOARD CN901 (Page 91)
  • Page 59 ZS-M35 6-19. SCHEMATIC DIAMGRAM — MAIN SECTION (1/3) — • Refer to page 100 for IC Block Diagrams. • Refer to page 54 for Note. (Page 85) (Page 82) (Page 79) (Page 82) (Page 80) (Page 85) (Page 82) (Page 80) •...
  • Page 60 ZS-M35 6-20. SCHEMATIC DIAMGRAM — MAIN SECTION (2/3) — • Refer to page 100 for IC Block Diagrams. • Refer to page 54 for Note. (Page 81) (Page 90) (Page 86) (Page 77) (Page 89) (Page 72) (Page 85) (Page 77)
  • Page 61 ZS-M35 6-21. SCHEMATIC DIAMGRAM — MAIN SECTION (3/3) — • Refer to page 54 for Note. (Page 62) (Page 77) (Page 56) (Page 56) (Page 77) (Page 93) (Page 93) • Voltage is dc with respect to ground under no-signal (detuned) condition.
  • Page 62 ZS-M35 6-22. PRINTED WIRING BOARDS — PANEL SECTION — • Refer to page 53 for Note. (Page 75) FL401 FLUORESCENT INDICATOR TUBE (Page 75) (21) (Page 76) (21) (Page 75) • Semiconductor HIGH SPEED Location Ref. No. Location D301 B-12...
  • Page 63 ZS-M35 6-23. SCHEMATIC DIAMGRAMS — PANEL SECTION — • Refer to page 99 for IC Block Diagrams. • Refer to page 54 for Note. (Page 77) (Page 77) • Voltage is dc with respect to ground under no-signal (detuned) condition.
  • Page 64 ZS-M35 6-24. PRINTED WIRING BOARDS — SWITCH SECTION — • Refer to page 53 for Note. (13) (Page 75) POWER (Page 75) HIGH SPEED • Semiconductor Location Ref. No. Location Ref. No. Location Ref. No. Location Ref. No. Location (21)

  • Page 65: Schematic Diagrams -Switch Section

    ZS-M35 6-25. SCHEMATIC DIAGRAMS — SWITCH SECTION — • Refer to page 54 for Note. (Page 79) • Voltage is dc with respect to ground under no-signal (detuned) condition. no mark : FM (Page 80) – 89 – – 90 –...
  • Page 66 ZS-M35 6-26. PRINTED WIRING BOARDS — POWER SUPPLY SECTION — • Refer to page 53 for Note. J901 AC IN • Semiconductor Location POWER BOARD Ref. No. Location Ref. No. Location D901 D910 D902 D911 D912 D903 D904 D913 D905...

  • Page 67: Schematic Diagrams -Power Supply Section

    ZS-M35 6-27. SCHEMATIC DIAGRAMS — POWER SUPPLY SECTION — • Refer to page 54 for Note. (Page 82) (Page 82) Note: Note: The components identi- Les composants identifiés par une marque 0 sont critiques fied by mark 0 or dotted line with mark 0 are criti- pour la sécurité.

  • Page 68: Ic Block Diagrams

    6-28. IC BLOCK DIAGRAMS IC1 TA2149N IC701 CXA2542AQ GND1 FM RF FM RF-OUT VCC1 FM RF-IN AM RF-IN AM LOW CUT MIX OUT FM OSC PD1 IV AM OSC SUMMING BUFF BUFF 1/1 OR VCC2 PD2 37 OSC-OUT LEVEL 1/16 SENS2 PD2 IV AM IF...
  • Page 69 IC702 CXD3009Q 59 58 57 56 55 54 46 45 44 DIGITAL DEMODULATOR SERIAL-IN INTERFACE 40 LRCKI VDD3 SYSM D / A D / A ERROR INTERFACE CORRECTOR INTERFACE 39 LRCK AVSS 38 ASYO AVDD 37 ASYI ASYMMETRY CORRECTOR AOUT1 36 BIAS 16K RAM 35 RF...
  • Page 70 IC152 BH6511FS INTERFACE INTERFACE IC192 BA033FP-E2 CHARGE PREDRIVE PREDRIVE PUMP. REFERENCE PREDRIVE PREDRIVE VOLTAGE INTERFACE INTERFACE IC101 CXA2523AR 43 42 USROP – RF AGC – USRC RFA1 BPF3T RFA2 RFA3 PEAK3T – HLPT –1 – – –2 – OFST PTGR TEMP PEAK –...
  • Page 71 IC121 CXD2654R 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 SPINDLE GENERATOR SERVO 75 TE MNT0 74 SE MNT1 EACH MONITOR 73 AVSS BLOCK CONTROL MNT2...
  • Page 72 IC603 PCM3003E/T2 A/D CONVERTER D/A CONVERTER VCC2 BLOCK BLOCK VCC1 AGND1 AGND2 VCC1 ANALOG ANALOG ANALOG ANALOG VCOM VINR FRONT-END LOW-PASS LOW-PASS FRONT-END VOUTR CIRCUIT CIRCUIT FILTER FILTER VOUTL VREF1 REFERENCE VREF2 MULTI-LEVEL MULTI-LEVEL VINL ∆Σ ∆Σ ∆Σ ∆Σ MODULATOR MODULATOR MODULATOR MODULATOR...

  • Page 73: Exploded Views

    SECTION 7 EXPLODED VIEWS NOTE: • The mechanical parts with no reference • -XX and -X mean standardized parts, so The components identified by mark 0 or dotted line with mark number in the exploded views are not supplied. they may have some difference from the 0 are critical for safety.

  • Page 74: Cabinet (Front) Section

    7-2. CABINET (FRONT) SECTION SP101 not supplied not supplied SP201 (including Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-3378-657-1 CABINET FRONT (SUB) ASSY 1-791-522-11 WIRE, PARALLEL (FFC) (10 CORE) 3-040-916-01 FOOT (F), RUBBER * 62 A-3322-634-A TUNER BOARD, COMPLETE X-3377-977-1 CHASSIS ASSY, NET (BLACK) * 63...

  • Page 75: Cabinet (Upper) Section

    7-3. CABINET (UPPER) SECTION S402 not supplied KSM-213CDM supplied supplied FL401 117 118 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark * 101 A-3322-636-A MAIN BOARD, COMPLETE 1-452-899-11 MAGNET 3-039-961-01 SPRING (IC) 3-036-467-01 PLATE, CHUCKING 1-791-521-11 WIRE, PARALLEL (FFC) (10 CORE) 3-923-736-01 COVER, CD * 104 A-3322-656-A FL BOARD, COMPLETE...

  • Page 76: Md Block Section

    7-4. MD BLOCK SECTION MDM-5GA not supplied not supplied not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-036-318-11 CARTRIDGE, LID 1-791-532-21 WIRE, PARALLEL (FFC) (23 CORE) 3-036-311-01 SPRING (MD LID) A-3322-531-A DG BOARD, COMPLETE 3-042-390-01 SCREW (+BVTTWH M3), STEP 3-041-799-01 SHEET, INSULATING 1-791-519-11 WIRE, PARALLEL (FFC) (26 CORE)

  • Page 77: Md Mechanism Section (Mdm-5Ga)

    7-5. MD MECHANISM SECTION (MDM-5GA) M103 MBU-5A Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark * 201 1-671-115-21 SW BOARD 4-996-227-11 LEVER (HEAD) * 202 4-996-217-01 CHASSIS 4-996-229-01 SPRING (HEAD LEVER), TORSION 4-996-223-11 INSULATOR (F) 4-996-212-01 LEVER (LIMITER) * 204 4-996-218-01 BRACKET (GUIDE R) 4-996-213-01 SPRING (LIMITER), TORSION...

  • Page 78: Md Base Unit Section (Mbu-5A)

    7-6. MD BASE UNIT SECTION (MBU-5A) HR901 not supplied not supplied M101 S102 M102 The components identified by Les composants identifiés par une mark 0 or dotted line with mark marque 0 sont critiques pour 0 are critical for safety. la sécurité.

  • Page 79: Optical Pick-Up Section (Ksm-213Cdm)

    7-7. OPTICAL PICK-UP SECTION (KSM-213CDM) not supplied M701 M702 The components identified by Les composants identifiés par une mark 0 or dotted line with mark marque 0 sont critiques pour 0 are critical for safety. la sécurité. Replace only with part number Ne les remplacer que par une piéce specified.

  • Page 80: Electrical Parts List

    BATT (+) BATT (–) SECTION 8 ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in • Items marked “*” are not stocked since The components identified by mark 0 or dotted line with mark the parts list may be different from the they are seldom required for routine service.
  • Page 81 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark IC121 8-752-389-44 IC CXD2654R R129 1-216-295-00 SHORT IC123 8-759-096-87 IC TC7WU04FU(TE12R) R130 1-216-295-00 SHORT IC124 8-759-590-00 IC MN41V4400TT-08LT1 R131 1-216-073-00 METAL CHIP 1/10W IC152 8-759-430-25 IC BH6511FS R132 1-216-097-11 RES-CHIP 100K 1/10W...
  • Page 82 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < SWITCH > C746 1-163-001-11 CERAMIC CHIP 220PF C747 1-164-489-11 CERAMIC CHIP 0.22uF S101 1-762-596-21 SWITCH, PUSH (1 KEY) (LIMIT IN) C748 1-163-809-11 CERAMIC CHIP 0.047uF S102 1-762-148-21 SWITCH, PUSH (2 KEY) (REFLECT RATE C749 1-163-021-11 CERAMIC CHIP 0.01uF...
  • Page 83 CD MOTOR Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark IC703 8-759-591-62 IC BA6998FP R724 1-216-097-11 RES-CHIP 100K 1/10W IC704 8-759-652-44 IC BA033ST-V5 R725 1-216-097-11 RES-CHIP 100K 1/10W R726 1-216-097-11 RES-CHIP 100K 1/10W < JUMPER RESISTOR > R731 1-216-081-00 METAL CHIP 1/10W...
  • Page 84 CD MOTOR Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C802 1-164-161-11 CERAMIC CHIP 0.0022uF 10% 100V C610 1-164-156-11 CERAMIC CHIP 0.1uF C803 1-163-038-00 CERAMIC CHIP 0.1uF C611 1-164-156-11 CERAMIC CHIP 0.1uF C804 1-126-934-11 ELECT 220uF C612 1-164-156-11 CERAMIC CHIP 0.1uF...
  • Page 85 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C689 1-164-156-11 CERAMIC CHIP 0.1uF FB631 1-500-445-21 FERRITE, EMI (SMD) C690 1-163-259-11 CERAMIC CHIP 220PF FB632 1-500-445-21 FERRITE, EMI (SMD) C691 1-162-964-11 CERAMIC CHIP 0.001uF FB633 1-469-185-11 FERRITE BEAD INDUCTOR C692 1-162-964-11 CERAMIC CHIP 0.001uF...
  • Page 86 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < IC > L610 1-414-398-11 INDUCTOR 10uH L611 1-416-107-21 COIL, COMMON MODE CHOKE IC601 8-759-670-32 IC RU8X13MF-0102 L612 1-414-521-21 INDUCTOR CHIP 10uH IC602 8-759-040-83 IC BA6287F L613 1-414-398-11 INDUCTOR 10uH IC603 8-759-561-36 IC PCM3003E/T2...
  • Page 87 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R629 1-216-833-11 RES-CHIP 1/16W A-3322-656-A FL BOARD, COMPLETE R630 1-216-833-11 RES-CHIP 1/16W ******************* R631 1-216-821-11 METAL CHIP 1/16W R632 1-216-821-11 METAL CHIP 1/16W 3-039-978-01 HOLDER (FL) R633 1-216-833-11 RES-CHIP 1/16W 3-042-764-01 SHEET (FL), ADHESIVE 3-846-312-01 SPACER...
  • Page 88 JACK Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-675-219-11 JACK BOARD D603 8-719-078-08 LED SLA-362MT-T31XFG (INSERT/TIMER) (GREEN) *********** D603 8-719-078-09 LED SLR-332DC-T32MN (INSERT/TIMER) < CONNECTOR > (ORANGE) D604 8-719-078-08 LED SLA-362MT-T31XFG (NO/CANCEL) * CN306 1-573-455-11 PLUG, CONNECTOR 4P (GREEN) D604 8-719-078-09 LED SLR-332DC-T32MN (NO/CANCEL)
  • Page 89 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < IC > R638 1-216-033-00 METAL CHIP 1/10W (ORANGE) IC602 8-749-016-97 IC NJL62H400A R641 1-216-025-11 RES-CHIP 1/10W (GREEN) < JUMPER RESISTOR > R641 1-216-033-00 METAL CHIP 1/10W (ORANGE) JC601 1-216-295-00 SHORT R643...
  • Page 90 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R676 1-216-033-00 METAL CHIP 1/10W C128 1-163-251-11 CERAMIC CHIP 100PF (ORANGE) C201 1-126-767-11 ELECT 1000uF R677 1-216-025-11 RES-CHIP 1/10W C202 1-126-963-11 ELECT 4.7uF (GREEN) C203 1-126-963-11 ELECT 4.7uF R677 1-216-033-00 METAL CHIP...
  • Page 91 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C408 1-163-235-11 CERAMIC CHIP 22PF C470 1-163-009-11 CERAMIC CHIP 0.001uF C409 1-163-234-11 CERAMIC CHIP 20PF C472 1-163-009-11 CERAMIC CHIP 0.001uF C410 1-107-725-11 CERAMIC CHIP 0.1uF C473 1-163-009-11 CERAMIC CHIP 0.001uF C411 1-104-665-11 ELECT...
  • Page 92 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < CONNECTOR > FB427 1-216-295-00 SHORT FB428 1-216-073-00 METAL CHIP 1/10W * CN301 1-564-778-11 PLUG, CONNECTOR (2.5mm) 4P FB429 1-216-295-00 SHORT * CN303 1-785-656-11 PIN, CONNECTOR (PC BOARD) 4P FB430 1-216-073-00 METAL CHIP 1/10W...
  • Page 93 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q401 8-729-903-10 TRANSISTOR FMW1 R212 1-216-073-00 METAL CHIP 1/10W Q402 8-729-018-99 TRANSISTOR 2SD2394-F R213 1-216-689-11 METAL CHIP 0.5% 1/10W Q403 8-729-021-82 TRANSISTOR 2SD2396K R214 1-216-089-11 RES-CHIP 1/10W Q405 8-729-021-82 TRANSISTOR 2SD2396K R215...
  • Page 94 MAIN POWER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R419 1-216-049-11 RES-CHIP 1/10W R476 1-216-049-11 RES-CHIP 1/10W R422 1-216-073-00 METAL CHIP 1/10W R477 1-216-073-00 METAL CHIP 1/10W R423 1-216-049-11 RES-CHIP 1/10W R478 1-216-049-11 RES-CHIP 1/10W R424 1-216-041-00 METAL CHIP 1/10W...
  • Page 95 POWER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C906 1-163-037-11 CERAMIC CHIP 0.022uF < TRANSISTOR > C907 1-163-037-11 CERAMIC CHIP 0.022uF C908 1-163-037-11 CERAMIC CHIP 0.022uF Q901 8-729-027-50 TRANSISTOR DTC123JKA-T146 C909 1-163-037-11 CERAMIC CHIP 0.022uF Q902 8-729-120-28 TRANSISTOR 2SC1623-L5L6 C910...
  • Page 96 TUNER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark S636 1-762-798-11 SWITCH, KEY BOARD (MD u) 1-163-017-00 CERAMIC CHIP 0.0047uF 5% S637 1-762-798-11 SWITCH, KEY BOARD (RADIO/BAND) 1-163-133-00 CERAMIC CHIP 470PF S638 1-762-798-11 SWITCH, KEY BOARD (CD x) 1-163-133-00 CERAMIC CHIP 470PF S640...
  • Page 97 TUNER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < COIL > < VIBRATOR > 1-419-517-11 COIL, AIR-CORE 1-781-592-11 VIBRATOR, CRYSTAL (75kHz) 1-419-518-11 COIL, AIR-CORE ************************************************************* 1-416-991-11 COIL, AM ANT 1-411-959-11 COIL, AM OSC MISCELLANEOUS 1-410-994-22 INDUCTOR CHIP 1.2uH *************** 1-419-465-11 COIL (DET) 1-791-523-11 WIRE, PARALLEL (FFC) (13 CORE)
  • Page 98 Ref. No. Part No. Description Remark ************** HARDWARE LIST ************** 7-685-649-79 SCREW +BVTP 3X14 TYPE2 N-S 7-685-648-79 SCREW +BVTP 3X12 TYPE2 N-S 7-685-647-79 SCREW +BVTP 3X10 TYPE2 N-S 7-685-533-19 SCREW +BTP 2.6X6 TYPE2 N-S 7-621-770-87 SCREW +P 2.6X5 7-685-133-19 SCREW (DIA. 2.6) (IT3B) 7-682-549-04 SCREW +B 3X10 7-621-772-20 SCREW +B 2X5 7-621-772-40 SCREW +B 2X8...
  • Page 99 ZS-M35 US Model Canadian Model SERVICE MANUAL SERVICE MANUAL Taiwan Model Ver 1.2 2001.07 SUPPLEMENT-1 File this supplement with the service manual. Subject : Change of PC Boards (ECN-RCA01727, RCA01728) Printed wiring board and schematic diagram of new type, and changed parts list are described in this Supplement-1.
  • Page 100 ZS-M35 – FL BOARD (component side) – FL Board Part No. Former type : 1-675-218-21 New type : 1-675-218-32 – JACK BOARD (component side) – JACK Board Part No. Former type : 1-675-219-21 New type : 1-675-219-32 TOP Board Part No.
  • Page 101 ZS-M35 1. Common Note on Schematic Diagram and Printed Wiring Boards – POWER BOARD (component side) – Common Note on Schematic Diagram: Common Note on Printed Wiring Boards: • X : parts extracted from the component side. • All capacitors are in µF unless otherwise noted. pF: µµF •...
  • Page 102 ZS-M35 2. PRINTED WIRING BOARD — MAIN SECTION — • Refer to page 3 for Note. (Page 57) (Page 57) ((Page 8)) ((Page 12)) ((Page 12)) (Page 60) (Page 57) ((Page 8)) (Page 84) (Page 73) ((Page 10)) ((Page 10)) ((Page 8)) •...
  • Page 103 ZS-M35 3. SCHEMATIC DIAMGRAM — MAIN SECTION (1/3) — • Refer to page 3 for Note. ((Page 9)) ((Page 7)) ((Page 6)) ((Page 7)) ((Page 6)) ((Page 9)) ((Page 7)) ((Page 6)) • Semiconductor Location Ref. No. Location Ref. No.
  • Page 104 ZS-M35 4. SCHEMATIC DIAMGRAM — MAIN SECTION (2/3) — • Refer to page 3 for Note. ((Page 7)) ((Page 11)) ((Page 9)) ((Page 11)) ((Page 5)) (Page 72) (Page 85) ((Page 5)) (Page 56) ((Page 7)) ((Page 5)) • Voltage is dc with respect to ground under no-signal •...
  • Page 105 ZS-M35 5. SCHEMATIC DIAMGRAM — MAIN SECTION (3/3) — • Refer to page 3 for Note. (Page 62) ((Page 5)) (Page 56) (Page 56) ((Page 5)) ((Page 13)) ((Page 13)) • Voltage is dc with respect to ground under no-signal (detuned) condition.
  • Page 106 ZS-M35 6. PRINTED WIRING BOARDS — PANEL SECTION — • Refer to page 3 for Note. ((Page 4)) FL401 FLUORESCENT INDICATOR TUBE ((Page 4)) ((Page 4)) • Semiconductor Location • (( )) : Page of service manual supplement-1 Ref. No.
  • Page 107 ZS-M35 7. SCHEMATIC DIAMGRAMS — PANEL SECTION — • Refer to page 3 for Note. ((Page 5)) ((Page 5)) • Voltage is dc with respect to ground under no-signal (detuned) condition. no mark : FM • (( )) : Page of service manual supplement-1...
  • Page 108 ZS-M35 8. PRINTED WIRING BOARDS — SWITCH SECTION — • Refer to page 3 for Note. (14) ((Page 4)) ((Page 4)) HIGH SPEED • Semiconductor Location Ref. No. Location Ref. No. Location Ref. No. Location Ref. No. Location D601 H-13...
  • Page 109 ZS-M35 9. SCHEMATIC DIAGRAMS — SWITCH SECTION — • Refer to page 3 for Note. ((Page 6)) • Voltage is dc with respect to ground under no-signal (detuned) condition. no mark : FM • (( )) : Page of service manual supplement-1...
  • Page 110 ZS-M35 10. PRINTED WIRING BOARDS — POWER SUPPLY SECTION — • Refer to page 3 for Note. J901 • Semiconductor Location AC IN Ref. No. Location Ref. No. Location D901 D910 D902 D911 D903 D912 D904 D913 D914 D905 D906...
  • Page 111 ZS-M35 11. SCHEMATIC DIAGRAMS — POWER SUPPLY SECTION — • Refer to page 3 for Note. ((Page 7)) ((Page 7)) Note: Note: The components identi- Les composants identifiés par une marque 0 sont critiques fied by mark 0 or dotted line with mark 0 are criti- pour la sécurité.
  • Page 112 ZS-M35 BATT (+) BATT (–) JACK 12. ELECTRICAL PARTS LIST Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark NOTE: A-3062-399-A LED BOARD, COMPLETE (ORANGE) D620 8-719-078-08 LED SLA-362MT-T31XFG (8/TUV) (GREEN) • Items marked “*” are not stocked since...
  • Page 113 ZS-M35 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R628 1-216-033-00 METAL CHIP 1/10W R672 1-216-033-00 METAL CHIP 1/10W (ORANGE) (ORANGE) R631 1-216-174-00 RES-CHIP 1/8W R673 1-216-025-11 RES-CHIP 1/10W (GREEN) (GREEN) R631 1-216-182-00 RES-CHIP 1/8W...
  • Page 114 ZS-M35 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C107 1-136-165-00 MYLAR 0.1uF C318 1-126-964-11 ELECT 10uF C108 1-126-960-11 ELECT C319 1-126-960-11 ELECT C109 1-126-964-11 ELECT 10uF C320 1-163-009-11 CERAMIC CHIP 0.001uF C110 1-126-961-11 ELECT 2.2uF...
  • Page 115 ZS-M35 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C454 1-163-009-11 CERAMIC CHIP 0.001uF C514 1-163-009-11 CERAMIC CHIP 0.001uF C455 1-163-009-11 CERAMIC CHIP 0.001uF C515 1-163-021-11 CERAMIC CHIP 0.01uF C456 1-163-009-11 CERAMIC CHIP 0.001uF C528...
  • Page 116 ZS-M35 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark FB412 1-469-185-11 FERRITE BEAD INDUCTOR Q305 8-729-027-46 TRANSISTOR DTC114YKA-T146 FB413 1-469-185-11 FERRITE BEAD INDUCTOR Q306 8-729-027-23 TRANSISTOR DTA114EKA-T146 FB414 1-216-295-11 SHORT Q307 8-729-900-53 TRANSISTOR DTC114EK FB415...
  • Page 117 ZS-M35 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R203 1-216-025-11 RES-CHIP 1/10W R408 1-216-047-11 RES-CHIP 1/10W R204 1-216-049-11 RES-CHIP 1/10W R409 1-216-047-11 RES-CHIP 1/10W R205 1-216-052-00 METAL CHIP 1.3K 1/10W R410 1-216-041-00 METAL CHIP...
  • Page 118 ZS-M35 MAIN POWER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R467 1-216-049-11 RES-CHIP 1/10W A-3322-637-A POWER BOARD, COMPLETE R468 1-216-049-11 RES-CHIP 1/10W *********************** R469 1-216-049-11 RES-CHIP 1/10W R470 1-216-198-11 RES-CHIP 1/8W 1-533-233-31 HOLDER, FUSE R471...
  • Page 119 ZS-M35 POWER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < AC INLET > S643 1-692-014-11 SWITCH, KEYBOARD (CD B X) S644 1-692-014-11 SWITCH, KEYBOARD (TUNE > +) 0 J901 1-540-009-11 INLET, AC (- AC IN) S645 1-692-014-11 SWITCH, KEYBOARD (TUNE .
  • Page 120 ZS-M35 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2001.

Table of Contents