Advertisement
Quick Links
Advertisement
Summary of Contents for Neo Car Audio AAUD3VD
-
Page 2: Installation Instructions
Installation Instructions Chapter 1 – Getting Started 1.1 Subject The NEO AUX adapter – an integration between an MP3 player and a factory installed car stereo. Equipped with the specific vehicle harness and standard 3.5mm jack the NEO- AUX interface will allow you to connect your MP3/DVD/XM player or iPod / iPhone to the car stereo system easily. -
Page 3: Important Compatibility Notes
b) Basic wiring diagram of NEO AUX adapter (see Figure 2): 1.6 Important Compatibility Notes If your vehicle is equipped with an external factory CD changer, you must disconnect it in order to be able to install the interface. You will lose the use of the external CD changer to gain the use of your iPod or MP3 player. -
Page 4: Preparation And Adapter Installation
CD changer port. The 8-pin CD changer port on such stereos is occupied by a solid 20-pin connector. Please contact Neo Car Audio tech support for further information 619-704-0690. - Page 5 For BMW vehicles only: Please refer to the installation insert for the special guidelines for BMW installation. For Toyota vehicles only: In some Toyota / Lexus / Scion vehicles the CD changer port is occupied with a factory harness (such as NAV or audio harness). The NEO package for Toyota includes a Y shaped vehicle cable.
- Page 6 2.6 Upgrade to full iPod/iPhone integration You can upgrade your NEO-AUX package to the iPod/iPhone integration with full control and charging by purchasing an additional cable. Please contact Neo Car Audio for more information 619-704-0690. 2.7 If your MP3/XM/DVD player has different size plug You can easily convert 3.5mm phone jack to the 2.5mm or RCA connectors with the...
-
Page 7: Chapter 3. - Support
Chapter 3. - Support Troubleshooting For technical support please contact Neo Car Audio 619-704-0690...