Omano OM113-1LP Instruction Manual

Thank you for purchasing an Omano microscope. We hope you enjoy it. It has been checked for quality
before shipping, but please take time to ensure that it has not been damaged in transit and that all the
parts are included. Please RETAIN ALL PACKAGING in case you need to return the microscope.
Please read this instruction manual carefully before using the microscope.
SAFETY

WARNING – Lamp bulb can become extremely hot when in use and can cause burns. DO
NOT TOUCH the lamp when in use. Allow to cool for 15 minutes prior to handling

Do not dismantle any parts of the microscope, except where noted in the instruction manual.
Dismantling the microscope will void the warranty.

In case of a problem with the microscope, call Microscope.com toll free on (877) 409-3556.

Keep the microscope at temperatures between 0C – 40C / 32F – 104F, maximum humidity 85%.

Do not place the instrument in direct sunlight or under direct indoor light. This environment can
influence the quality of the specimen imaging.

Do not place the instrument in a dusty environment. When not in use, cover the microscope with
the included dust cover.

Keep the instrument on a level and sturdy surface.

Carry the microscope in two hands, one hand under the base, the other holding the microscope
arm.
ASSEMBLY
Some minor assembly may be required. If required,
1) Remove the microscope base from the packing material. Remove the microscope head from the
packing material and place in the focus block (ring holder). Tighten locking nut to secure the head
in position. Most Omano stereo microscopes have rotatable heads so you can view the
microscope from either side of the stand. Simply rotate the head through 360° and tighten the
locking nut. If using a pole microscope, you can rotate the entire head and focus block, which is
useful for viewing larger specimens that do not fit on the stage.
Stereo Microscopes
Instruction Manual