GE Lighting T5 Fluorescent Fixture Series Installation, Use And Maintenance Manual

GE
Lighting
T5 Fluorescent Fixture Series
READ THROUGHLY BEFORE INSTALLATION
Save these instructions for future use
These Instructions do not purport to cover all details or variations in
luminaire nor to provide for every possible contingency to be met in
connection with installation, operation or maintenance. Should fur-
ther information be desired or should particular problem arise which
are not covered sufficiently for the purchaser's purpose, the matter
should be referred to General Electric Company.
I. GENERAL
This luminaire has a beautiful outline, be compact, lightweight and
easy to use. It also has the features of soft light, safety and high
efficiency. It is main designed for indoor lighting application, and
should not be used in areas of limited ventilations, or in high ambient
temperature enclosures. It is suitable for mounting on a normally
flammable surface. Best results will be obtained if installed and
maintained according to the following recommendations. Please refer
section III for the application limitation details.
The Manufacturer has made every effort during the design and
construction stages to make its products completely free of risks
when correctly used. Note however that accident prevention and
safety regulations stipulate that the users of the product is obliged
to ensure that all persons involved in servicing, installing, handling,
using or selling the products are familiar with the information supplied
by the Manufacturer and fully aware of any precautions that must
be adopted. Depending on the circumstances, the instructions in
this document must be communicated, together with any other
information that may be necessary, to any Company or person
involved in the installation of GE lighting products.
II. UNPACKING
The luminaire has been properly packed to avoid damage during
transit. Inspect the luminaries to confirm there is no damage. Do not
install a damaged luminaire or damaged luminaire components.
The carton consists of:
• Fixture
• Leaflet
• Accessories
Ins ta lla ti on , U s e a n d M ai n t e n a n c e M an ual
Class II IP20
CAUTION FOR ELECTRIC SHOCK/RISK OF BURN/PROPER
INSTALLATION
• Non-professionals are not allowed to operate. Shut off the
power before maintenance.
• Risk of burn, allow lamps/fixture to cool down before handling.
III. APPLICATION NOTICE
PLEASE APPLY THE PRODUCT ACCORDING TO FOLLOWING
STATEMENT
This is a fixed general-purpose luminaire mounted with fluorescent
lamp, which can be used for interior installation, or connect to
a series. Application can be in kitchen, shopping market & office
building.
IV. INSTALLATION
• Ensure this manual is provided to the installers and users;
• Cut off the power before installation and maintenance;
• If series connection is applied, the luminaire quantities must be
not more than 10.
• This fixture is only used for indoor, under no circumstances be
used in high temperature and high humidity environment.
Risk of Injury
• Luminaire may fall down if not installed properly, follow instal-
lation instructions
• Ware safety glasses and proper aid during installation and
maintenance
TOOLS/ACCESSRIES YOU WILL NEED
Screwdriver – (6~12mm): Used for drive the screw in for the mounting
220-240V~ 50/60Hz
WARNING
WARNING
CAUTION