Table of Contents
Advertisement
Quick Links
Congratulations on your purchase of our SUNJOY™ Hardtop Pavilion. Our clear, easy to follow,
step-by-step instructions will guide you through the assembly process from start to finish.
Tools required: a Philips screwdriver, a hammer and a ladder that is about 6.6 feet (2 meters) in height.
WARNING:
This unit is heavy!
Multiple adults are needed for safe assembly
Keep all children and pets away from assembly area. Children and pets should be supervised when they are in
the area of the gazebo construction.
Keep assembly area at least 6 feet from any obstruction such as fence, garage, and house, overhanging
branches, laundry line or electrical wires.
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions
should always be followed to reduce the risk of personal injury and damage to the product. Please read all
instructions before assembly and use.
For outdoor use only. Check all bolts for tightness before use, and periodically check and tighten bolts as
necessary.
Please take time to read these instructions thoroughly and follow each step carefully for safe and easy
operation.
Owner's Manual
Hardtop Pavilion / Item#: L-GZ075PST-7
Important
--- Never assemble this alone!
1
Advertisement
Table of Contents
Related Manuals for Sunjoy Hardtop Pavilion
Summary of Contents for Sunjoy Hardtop Pavilion
- Page 1 Owner’s Manual Hardtop Pavilion / Item#: L-GZ075PST-7 Congratulations on your purchase of our SUNJOY™ Hardtop Pavilion. Our clear, easy to follow, step-by-step instructions will guide you through the assembly process from start to finish. Tools required: a Philips screwdriver, a hammer and a ladder that is about 6.6 feet (2 meters) in height.
-
Page 2: Part List
Part List (X8) (X8) Gutter Corner connector (X8) Larger roof top (X2) Larger roof connecting part (X8) (X8) Larger roof bar-1 Larger roof bar-2 (X8) (X1) Larger roof bar-3 Center hook (X8) (X1) Top roof bar Top connector Covering (X8) (X8) Covering piece for piece-1 for... -
Page 3: Step #1 - Top Frame Assembly
Step #1 – Top frame assembly (x16) AA M6x35 mm screw TBZ01406035HQ (x130) BB M6 washer TBZ10806HQ (x58) CC M6x15 mm screw TBZ00306015HQ (x24) II M6x15 mm screw TBZ01406015HQ (x32) DD M6x55 mm screw TBZ00306055HQ (x32) EE M6 Nut TBZ20106HQ （X2）W1 M6 Wrench Fig.1: Insert Gutters (A1) into each other from end to end, and use M6 washer (BB) and M6x35 screw (AA) to... - Page 4 Fig. 2: Attach Corner connector (B1) onto Gutter (A1) and use M6x15 screw (II) and M6 washer (BB) to secure them. Fig. 3: Insert Larger roof connecting part (D1) into each other from end to end, and use M6x15 screw (CC) and M6 washer (BB) to secure properly.
-
Page 5: Step #2 - Roof Assembly
Fig. 6-1: Screw Center hook (H1) into Top roof (J1) and secure them properly. Fig. 6-2: Fix each Top roof bar (I1) and Top connector (J1) with M6x55 mm screw (DD), M6 washer (BB) and M6 nut (EE). Fig. 7: Connect Top roof bar (I1) with Larger roof connecting part (D1) and use M6x15 screw (CC) and M6 washer (BB) to secure. - Page 6 Fig. 10: Attach Top roof covering (C2) onto Top roof bar (I1), and secure them with M6x45 screw (FF) and M6 washer (BB). Make sure C2 is pressing on Covering piece for top roof (B2) properly here. Fig. 11: Place Top roof (D2) onto Top connector (J1), and screw Top decoration (E2) into J1 and secure. Fig.
-
Page 7: Step #3 - Complete Assembly
Step #3 – Complete assembly M6 washer (x80) BB TBZ10806HQ M6x20 screw (x64) GG TBZ01406020HQ M6x55 mm screw (x16) HH TBZ00106055HQ Ф8x260 mm stake (x32) JJ TBZ10608206HQ (x1) W2 Touch up paint Fig. 15-1: Put up the assembled roof, and place it on Post (A3), and use M6x20 screw (GG) and M6 washer (BB) to fix A3 and Gutter (A1). -
Page 8: Spare Parts
Spare Parts (x2) AA M6x35 mm screw TBZ01406035HQ (x8) BB M6 washer TBZ10806HQ (x4) CC M6x15 mm screw TBZ00306015HQ M6x55 mm screw (x2) DD TBZ00306055HQ (x2) EE M6 nut TBZ20106HQ (x2) FF M6x45 mm screw TBZ00306045HQ (x2) GG M6x20 mm screw TBZ01406020HQ M6x55 mm screw (x2) HH...