Polaris INDY TRAIL RMK Service Manual page 69

ENGINES
Engine Removal, Typical-Cont.
5. Free recoil rope from chassis.
NOTE:Be sure to tie a knot in recoil rope upon removal
so rope doesn't wind up into recoil housing.
6. Loosen clamps at carburetor mounting flange. Pull
carbs from adaptors and secure out of the way. Note
routing of all cables and hoses for reassembly.
7. Disconnect oil pump control cable.
8. Disconnect and plug oil supply line.
TIP: A bolt or spare water trap plug can be used to plug
the oil line from the oil reservoir.
3.6