Tps Adjustment - Polaris INDY TRAIL RMK Service Manual

ELECTRICAL

TPS Adjustment

1. Loosen the two screws that hold the TPS on the
carburetors.
2. Turn the TPS clockwise to decrease voltage, or
counterclockwise to increase voltage.
3. When the TPS is set to the desired voltage, tighten
the holding screws and verify voltage is 4.0 to 4.2
volts at Wide Open Throttle for Polaris domestic
engines, and 3.77 volts for Fuji engines (800 XCR).
9.26
Decrease
Increase