Tethering And Portable Hotspot - Blaupunkt Endeavour 800 NG Manual

To make your PAD to other Bluetooth devices visible, tap the name of your device
(default is 8BPE0H or 10BPE0H, depending on the model)
After the connection is made, data can be exchanged between the PAD and the
Bluetooth enabled device.

6-1-4 Tethering and portable hotspot

You can make your PAD Wi-Fi hotspot, the other WiFi-enabled devices serves as a
practical portable Internet access point.
Ensure a safe access. To protect your PAD and your hotspot from
unauthorized access, it is recommended that a security key with a
password (WPA2 is the most secure level) to set up.
Perform the following steps to use your pad as a wireless hotspot:
1. Disable the WiFi function:
> Settings >WiFi > On/Off.
2. Tap on > Settings > More... >Tethering & portable hotspot.
3. Tap on Portable WiFi-Hotspot, to enable the hotspot function.
4. Tap on WiFi hotspot Configuration , to change the security configuration:
 Network SSID—
 Security—
Select the encryption. If encryption is selected, a password must be
set. Other users can only access your Wi-Fi hotspot, when the correct password is
entered.
5. Tap Save to save the settings. Once your Wi-Fi hotspot is active, other Wi-Fi
enabled devices can access it by your hotspot's SSID entered, set a security level
and the correct WiFi password is entered.
6. Please note that this mode consumes more power. A shorter battery life may be
the result.
Enter a name for your hotspot.
20