Visual Learning Served On Demand ™ SAFARI Montage Live! H.323 Gateway Installation Guide...
Page 2
Live! H.323 Gateway ® Thank you for choosing the SAFARI Montage Live! H.323 Gateway. In just a few steps, you’ll have the ability to included traditional H.323-based videoconferencing systems in your SAFARI Montage Live! videoconferencing sessions This setup guide covers how to install and configure your gateway.
Unpacking the Hardware Step 1 Carefully remove the SAFARI Montage Live! Gateway and the following items from the box, and place them on a flat surface. If any items are missing, please call 1.800.843.4549. DV Dongle (2) Keys (2) Power Cord Ethernet Cable (VGA and DVI;...
Page 4
Connecting the SAFARI Montage Live! H.323 Gateway Step 3 a. Using the image below as a guide, first connect the gateway to the network by plugging an Ethernet cable into any active Ethernet port on the network. b. Connect a monitor, keyboard and mouse to the gateway.
Page 5
This window must remain open at all times for normal operation; however, this window can be minimized. Networking the SAFARI Montage Live! H.323 Gateway Step 5 Configure the SAFARI Montage Live! H.323 Gateway in the same manner a Windows appliance would be configured for the networking environment being ®...
Page 6
SAFARI Montage Live! H.323 Gateway into the address bar and press ”enter”. Congratulations! Basic installation and startup are complete. For information on how to use the SAFARI Montage Live! H.323 Gateway, click on the Help icon ( ) located at the top right of the interface.
Additional Port Settings In addition to the required ports listed on page 5, the following ports may need to be configured in order for the SAFARI Montage Live! H.323 Gateway to operate with traditional videoconferencing equipment. Port Type Application...